CE marked · ISO 9001:2015 · 18-month warranty

· products · By

Sizing an Auto Loader and What It Costs

How to size an auto loader from the consumption rate, the published price bands, the power and air it uses, and what a wrong-sized machine costs.

Size an auto loader from the maximum consumption rate of the machine it feeds: capacity should be 1.5 to 2 times that rate, less the 5 to 10% per 10 m lost to conveying distance. That ratio decides the pump, the line and the price band.

The money follows the sizing, and the bands are wide. Small vacuum loaders of 500-1,000 kg/h cost US$3,000-6,000, a self contained unit for one machine typically costs US$2,500-9,000, and central vacuum systems run US$8,000-25,000 before installation adds 10-25%.

Size, price and running cost

  • Size at 1.5 to 2 times consumption, then allow for 5 to 10% per 10 m.
  • Small vacuum loaders rated at 500-1,000 kg/h typically cost US$3,000-6,000.
  • Energy runs 2 to 5 kWh per 1,000 kg; variable speed drives cut 20 to 40%.
  • Central vacuum systems are listed at US$8,000-25,000 before installation adds 10-25%.
Studio product image of a TENGLONG plastic granulation line on a white background, included as a machine reference for sizing an auto loader and what it costs.
Studio product image of a TENGLONG plastic granulation line on a white background, included as a machine reference for sizing an auto loader and what it costs.. Used here as a visual reference for sizing an auto loader and what it costs. Rendering, not a photograph of a customer plant.

Size the Loader from the Consumption Rate

Size an auto loader from the maximum consumption rate of the machine it feeds, not from the motor on the pump. The working rule puts loader capacity at 1.5 to 2 times the maximum rate the machine consumes, and that ratio is the starting point for every other number in the specification. A loader that can keep up with a machine at full output will also keep the hopper full when the machine is running unevenly, which is where a real plant spends most of its time.

The published bands make the choice fairly narrow once the consumption rate is known. Small vacuum loaders of 500-1,000 kg/h cost US$3,000-6,000, medium units of 1,000-3,000 kg/h cost US$6,000-12,000 and large units of 3,000-5,000 kg/h cost US$10,000-15,000. A line rated at 1,000 kg/h does not automatically need a 1,000 kg/h loader, because the 1.5 to 2 times rule puts the requirement above the line’s own nameplate rate. Read those bands as a guide to pump and filter size, not as a throughput promise.

The other side of the sizing is the distance the material has to travel. Conveying distance reduces capacity by roughly 5 to 10% per 10 m, so a loader that is adequate at five metres is marginal at twenty. The route belongs on the same sheet as the consumption rate, with the number of bends and the height of the receiving hopper. A quotation that asks only for kilograms an hour is missing half of the sizing question.

Converting a Line Rate into a Loader Rating

Rendered customer-plant scene with TENGLONG plastic recycling machinery on the plant floor, used here as equipment context for sizing an auto loader and what it costs.
Rendered customer-plant scene with TENGLONG plastic recycling machinery on the plant floor, used here as equipment context for sizing an auto loader and what it costs.. Shown here as production context. Rendering, not a photograph of a customer plant.

Take the rate from the machine behind the loader rather than from the loader catalogue. The 12-platform comparison on this site lists a film granulating line at 200-800 kg/h and a flakes pelletizing machine at 300-1,000 kg/h, and each of those rates is a consumption rate for the hopper in front of it. The loader is chosen against the top of that band, with the 1.5 to 2 times margin added on top of the line rate.

Energy tells you whether the size is sensible. Vacuum loader power is typically 3 to 15 kW depending on capacity and distance, and energy consumption is typically 2 to 5 kWh per 1,000 kg conveyed. A loader at the small end of the range moving material a short distance will sit near 3 kW; a large unit feeding a distant hopper will sit near 15 kW. If a quotation gives a power figure with no capacity or distance beside it, that figure cannot be checked.

Variable speed drives with high-efficiency pumps reduce energy use by 20 to 40%, and that saving changes with how steadily the machine runs. A line that runs continuously gets the full benefit; a line that starts and stops gives some of it back. The published output basis is finished bagged pellets averaged over four hours, so that is the rate to convert into a loader rating rather than a peak taken just after startup.

The Price Bands and What They Buy

The purchase price comes in bands, and the bands are wider than the capacity bands suggest. A self contained vacuum loader for one machine typically costs US$2,500-9,000 depending on capacity and filter size, while a central pump station with several receiving hoppers and piping falls between US$20,000-60,000 installed. The choice between one and the other is usually made on the number of machines to be fed rather than on their individual rates. A single extruder rarely justifies a central station, however attractive the figure looks per hopper.

Central vacuum systems are listed separately at US$8,000-25,000, with installation adding 10-25%, and gravimetric dosing adds a further US$12,000-45,000. Those three figures are the difference between a loader that simply fills a hopper and a system that also controls the recipe. A plant needing accurate dosing should price both, because the loader on its own will not deliver the accuracy a gravimetric system is bought for. Compare them on the same scope, since a price omitting piping and installation is not a like-for-like figure.

The compressed air is a separate line on the budget. A self contained screw or piston air compressor is priced between US$2,000 and US$7,000, with piston models covering 8 to 40 bar to supply clean compressed air for filter pulses and pneumatic valves. Freight, foundations and installation are quoted apart from the machine price, so the loader figure on an order confirmation is rarely the figure the plant finally pays for the handling package.

Running Cost, Compressed Air and Dosing

The running cost of a loader is dominated by power and by the air that cleans its filter. Energy consumption is typically 2 to 5 kWh per 1,000 kg conveyed, and variable speed drives with high-efficiency pumps reduce energy use by 20 to 40%. Across a plant running three shifts, the difference between a pump at the top and bottom of that band is a real annual figure, and it is settled by the sizing decision rather than by the tariff.

Dosing belongs in the same calculation if the loader is expected to do more than fill a hopper. A volumetric feeder costs US$2,000-8,000 with accuracy typically plus or minus 1 to 2%, while a gravimetric feeder costs US$8,000-25,000 with accuracy typically plus or minus 0.25 to 0.5% and compensates automatically for density changes. A loader sized without a feeder behind it will move plenty of material and still produce an inconsistent blend. That is why the dosing line belongs on the same enquiry form as the loader.

The specific energy of the plastic granules production line behind the loader sets the context for all of this. The published range is 0.26-0.50 kWh/kg specific energy, and the handling equipment is a small share of that total. It is tempting to treat the loader as too small to bother with, but one that starves the machine downstream raises the specific energy of every kilogram the line makes, because the extruder spends part of its time waiting rather than working.

What Getting the Size Wrong Costs

An undersized loader is not a cheap loader. It runs continuously, never quite fills the hopper, and leaves the screw working on a variable head of material, and the cost appears as unstable output rather than as a breakdown. An unplanned extruder stop is costed at US$5,000-50,000 per hour depending on line size, and a hopper that runs dry is one of the cheaper ways to cause one. The operator then throttles the line by hand until the panel looks calmer, and the shortfall quietly becomes the new normal.

An oversized loader is less dramatic but not free. It costs more on the order, it draws more power, and on a long line it can convey material faster than the receiving hopper can settle it, which creates a bridging problem of its own. The correct size is the one that keeps the hopper full with the 1.5 to 2 times margin intact after the 5 to 10% per 10 m distance loss has been taken out.

The commercial terms are ordinary and worth checking before the size is agreed. Payment is 30% T/T deposit with 70% before shipment, and L/C at sight above US$50,000, while lead time for a standard line is 25-35 days. Published prices are indicative starting prices for 2026 and are configuration-dependent, so a formal quote has to state the motor power, the control system and the exact scope of supply before two loaders can be compared fairly.

Loader capacity bands and the published price beside each

The table sets out loader capacity bands and the published price beside each. Check the sizing rule against your own consumption before you choose a band.

Loader class Capacity band Published price
Small vacuum loader 500-1,000 kg/h US$3,000-6,000
Medium unit 1,000-3,000 kg/h US$6,000-12,000
Large unit 3,000-5,000 kg/h US$10,000-15,000
Self contained loader One machine US$2,500-9,000
Central vacuum system Several hoppers US$8,000-25,000
Central pump station Installed with piping US$20,000-60,000
Gravimetric dosing Added to the loader US$12,000-45,000

Common questions, with short answers

Q1: How do I size an auto loader?

Loader capacity should be 1.5 to 2 times the maximum consumption rate of the machine it feeds. Then subtract the distance effect: conveying distance reduces capacity by roughly 5 to 10% per 10 m, so the route and the number of bends belong in the sizing calculation.

Q2: How much does an auto loader cost?

A self contained vacuum loader for one machine typically costs US$2,500-9,000. Central vacuum systems are listed at US$8,000-25,000 with installation adding 10-25%, and gravimetric dosing adds a further US$12,000-45,000.

Q3: What does a vacuum loader cost to run?

Energy consumption is typically 2 to 5 kWh per 1,000 kg conveyed, with power of 3 to 15 kW. Variable speed drives with high-efficiency pumps reduce energy use by 20 to 40%, so the sizing decision sets the annual power bill more than the tariff does.

Q4: What does an undersized loader cost me?

An undersized loader leaves the hopper running low and the screw working on a variable head, which shows up as unstable output. An unplanned extruder stop is costed at US$5,000-50,000 per hour depending on line size, and a dry hopper is one way to cause one.

The companion write-ups for this machine family are: Auto Loader: What It Contains and How It Refills the Hopper, Auto Loader Hopper Level: The Setting That Decides Loading, Auto Loader Acceptance, Commissioning and First-Week Faults and Auto Loader: What Changes When Filling Stops Being Manual.

About the author

Zhou Gong (周工) has spent his working life on recycling machinery at TENGLONG Plastic Machinery in Linyi, Shandong, where 820-plus lines have been delivered across 46 export markets since 2016. I have watched a perfectly good loader throttled all shift because the route gained a bend nobody mentioned in the enquiry. Each figure quoted here is either measured on a machine or published with a date attached; nothing has been estimated to fill a gap.

Give our engineers the material form, the contamination level and the throughput, and the answer comes back within a working day as a model and a price range. Running 10-20 kg of your own material is free, and a measured output more than 5% under the agreed figure puts the deposit back in your hands.

Related reading

العربيةAR