Die head
模头
The plate at the end of the extruder that shapes the melt into strands or feeds a die-face cutter. Hole diameter and land length set pellet size.
See the matching machineEquipment index · 11 auxiliary components
The components that decide pellet quality and uptime. Filtration area, die geometry and cutter condition move output more reliably than a bigger main motor.
11 defined terms on this page, each with its own citable definition.
Terminology
A screen that blinds every hour is not a filtration problem, it is an undersized filtration area. This is the first thing to check when output falls.
模头
The plate at the end of the extruder that shapes the melt into strands or feeds a die-face cutter. Hole diameter and land length set pellet size.
See the matching machine换网器
A sliding or continuous plate carrying filter mesh. It removes paper, metal, wood and unmelted gel from the melt before the die.
See the matching machine液压换网器
Hydraulically shifted dual-cavity changer that swaps a blinded screen in seconds without stopping extrusion or breaking the strand.
See the matching machine熔体过滤器
A large-area filtration unit for dirty feed. On film lines 80 mesh is typical; two stage recycling lines use 60–100 mesh across two stages.
See the matching machine切粒机
The blade assembly after the die or water bath: 12-blade strand cutters, water ring die-face cutters or underwater cutters. Blade condition sets dust level.
See the matching machineTerminology
Consistent feeding and buffering are what let a line run unattended. Every one of these parts is cheaper than an hour of unplanned downtime.
料仓
A buffer vessel for finished pellets before bagging, letting the pelletizer keep running while bags are changed downstream.
See the matching machine储料斗
A smaller hopper above the feeder or die-face cutter; on low-density film flake it is usually paired with a crammer.
See the matching machine搅拌罐
A heated or ambient vessel for blending regrind with additives, masterbatch or liquid modifiers before dosing.
See the matching machine塑料搅拌机
High-speed or vertical mixer that homogenises flake, powder and colour so the extruder sees a consistent bulk density and recipe.
See the matching machine塑料干燥机
Hopper dryer or dehumidifying dryer for hygroscopic polymers. PET needs desiccant air; PE and PP usually only need surface moisture removed.
See the matching machine吸料机
Vacuum conveyor that refills the hopper automatically from a bag or silo, keeping the feed throat at a constant level.
See the matching machineQuestions
Each answer is written to stand on its own when quoted.
It depends on contamination and filtration area, not on a fixed schedule. A line that blinds a screen every hour on film feed is undersized; with the right area and 80 mesh, changes are measured in hours per shift. Log die pressure before and after each change — a rising trend points to an upstream washing problem.
On TENGLONG lines, knives, screens and heater bands are standard sizes and are stocked for three years. Screws are nitrided in our own plant to a 0.5–0.7 mm case at HV 900–1000, straightened to 0.03 mm.
Continue
Follow the equipment chain, or open the machine pages for specifications and price ranges.
Next step
Polymer, form, contamination, target output, voltage and country are enough for a model recommendation within one working day.
Six fields is enough for a first recommendation. Drawings, layout and a firm price follow after the material sample is tested.