TL-MB · Specialised lines
Masterbatch Granulator
Small-batch twin screw line for 20–60% pigment loading — 20 to 500 kg/h with minimal changeover loss.
- Output
- 20–500 kg/h
- Screw diameter
- 35.6 / 51 / 62.4 / 71 mm
- Feedstock
- Pigment powder, carrier resin, wax and additives
- Indicative price
- US$26,000 – 110,000
What this machine does
Colour is a dispersion problem, not a melting problem. Pigment at 30% loading has to be wetted, de-agglomerated and distributed into a carrier within a few seconds of residence time, or the customer sees specks in a 20 µm film. The TL-MB uses a 40:1 screw with two dispersion zones and a melt seal between them, so the pigment sees high shear twice without over-heating the carrier.
Changeover speed is what makes the machine pay. The barrel lifts hydraulically, the screw can be pulled in 15 minutes, and the flow path has no dead corners: a full colour change including purge takes 40–60 minutes. That is what allows a 200 kg/h line to run eight colours a day.
Cutting is usually strand, because masterbatch buyers want cubic pellets that disperse predictably. Underwater cutting is offered for 1.5 mm micro-pellets and for pigment systems that smear on a strand bath. Both use the same frame, so the choice can be revisited later.
Models and output
| Model | Output | Screw diameter | Screw L/D | Main motor | Footprint | Weight |
|---|---|---|---|---|---|---|
| TL-MB-35 | 20–60 kg/h | 35.6 mm | 40:1 | 11 kW | 4.5 × 1.2 × 1.8 m | 1.8 t |
| TL-MB-52 | 100–180 kg/h | 51 mm | 40:1 | 37 kW | 6.0 × 1.4 × 2.0 m | 3.0 t |
| TL-MB-65 | 250–350 kg/h | 62.4 mm | 40:1 | 75 kW | 7.5 × 1.6 × 2.2 m | 4.6 t |
| TL-MB-75 | 400–500 kg/h | 71 mm | 40:1 | 132 kW | 8.5 × 1.8 × 2.4 m | 6.2 t |
Output figures refer to LDPE film at 85% bulk density with 3% moisture. Actual output depends on feedstock, flake size and filtration.
Engineering highlights
- Two dispersion zones separated by a melt seal: 60% pigment without agglomerates
- Hydraulic barrel opening and 15-minute screw extraction for colour change
- Polished, dead-corner-free flow path: full purge in 40–60 minutes
- Melt pump and 200 mesh screen for speck-free film grades
- Loss-in-weight dosing for pigment, carrier, wax and additive
- Recipe memory with automatic temperature and speed recall
How the line works
Weigh
Pigment, carrier, wax and additive are dosed gravimetrically to ±0.3% per component.
Wet out
The first kneading zone wets pigment into the melted carrier under high shear.
Disperse
A melt seal, then a second dispersion zone breaks remaining agglomerates below 20 µm.
Filter and cut
A melt pump pushes through 200 mesh; the strand cutter produces 2–3 mm pellets.
Where it runs
- Colour masterbatch for film and injection
- White masterbatch (TiO2 50–70%)
- Black masterbatch (carbon black 30–50%)
- Additive masterbatch: anti-block, UV, flame retardant
- Filler masterbatch for PE film
Options and upgrades
- Underwater pelletizer for 1.5 mm micro-pellets
- Side feeder for high-bulk pigment and talc
- Liquid colour injection for solvent-based pigment
- Vacuum loader and dust extraction on the powder port
- Statistical process control export to a plant network
Questions buyers ask
How long does a colour change take?
Forty to sixty minutes from dark to light, including screw extraction, purging with carrier and re-stabilising temperature. Running colours from light to dark in sequence cuts that roughly in half.
Can I make 70% TiO2 white masterbatch on this machine?
The TL-MB-65 and 75 can, with a side feeder and a deeper-flighted screw; 70% loading is at the practical limit and output drops 40%. Most plants run 50–60% and reach the same let-down ratio with better dispersion.
What is the smallest economical batch size?
Around 25 kg on the TL-MB-35 — enough to fill the barrel and pull a stable strand for 10 minutes. Below that, material loss in the machine exceeds the batch value.
Related machines
Other platforms in the range
TL-TSExtrusion granulating
Twin Screw Extruder Granulating Line
Co-rotating 65–95 mm screws for filled, reinforced and alloyed compounds — 300 to 1,500 kg/h.
- Output
- 300–1,500 kg/h
- Indicative price
- US$38,000 – 128,000
TL-STPelletizing systems
Strand Pelletizing Line
The reference line for cubic pellets: water bath, air knife and 12-blade cutter, 150 to 800 kg/h.
- Output
- 150–800 kg/h
- Indicative price
- US$16,800 – 48,000
TL-UWPelletizing systems
Underwater Pelletizer
Shear-cut pellets in a pressurised water chamber — 300 to 2,000 kg/h with spherical, dust-free pellets.
- Output
- 300–2,000 kg/h
- Indicative price
- US$62,000 – 160,000
Need a line sized to your material?
Masterbatch Granulator
Send the polymer, contamination level and target output. You get a model recommendation, power estimate and price range within one working day.
- Reply within 1 working day
- Sample test before you commit
- Factory visits and live video trials by appointment.
Tell us what you need to granulate
Six fields is enough for a first recommendation. Drawings, layout and a firm price follow after the material sample is tested.