Plastic crusher
塑料粉碎机
High-speed rotating knives with a sizing screen. Produces 25–30 mm flake from bottles, crates, sprues and sheet before the washing stage.
See the matching machineEquipment index · 7 size-reduction terms
The first stage of a recycling line. Get the particle size wrong here and the washing line, the force feeder and the screen changer all pay for it downstream.
7 defined terms on this page, each with its own citable definition.
Terminology
For post-consumer material the target after crushing is 25–30 mm: small enough to wash, large enough not to be lost in the float-sink tank.
塑料粉碎机
High-speed rotating knives with a sizing screen. Produces 25–30 mm flake from bottles, crates, sprues and sheet before the washing stage.
See the matching machine塑料破碎机 / 粗撕碎
Slow, high-torque twin shafts that open bales and reduce bulky purgings or thick parts. Coarse shredding, usually the first machine in the line.
See the matching machine塑料磨粉机
Disc or turbo mill that grinds clean rigid regrind into powder, typically for rotational moulding, coating or as a compounding filler.
See the matching machine强力粉碎机
Reinforced rotor, larger bearings and a stronger drive for continuous loads: thick pipe, profile, sheet offcuts and purging lumps.
See the matching machineTerminology
Hollow containers bounce, film wraps around shafts, and photovoltaic film cannot tolerate metal or glass pickup. Each needs a different cutting chamber.
PET 瓶粉碎机
A cutting chamber with anti-bounce feeding for hollow bottles, producing uniform flake for a PET bottle washing line and label separation.
See the matching machine薄膜粉碎机
Designed for flexible low-density feed with anti-wrapping rotors and water-assisted cutting, usually feeding a friction washer directly.
See the matching machinePVB 光伏膜粉碎机
High-purity size reduction for PVB photovoltaic film, where glass, metal and EVA contamination must stay extremely low before reprocessing.
See the matching machineQuestions
Each answer is written to stand on its own when quoted.
For post-consumer feed, yes: crush to 25–30 mm, wash below 0.5% contamination, dewater below 2% moisture. For clean in-house scrap, none of the three is needed. Bought-in washed flake sometimes needs only a hopper dryer.
Around 25–30 mm for a washing line. Too fine and the flake is lost in the float-sink tank and dries poorly; too coarse and labels, glue and cap material stay trapped in the fold.
Continue
Follow the equipment chain, or open the machine pages for specifications and price ranges.
Next step
Polymer, form, contamination, target output, voltage and country are enough for a model recommendation within one working day.
Six fields is enough for a first recommendation. Drawings, layout and a firm price follow after the material sample is tested.