TL-PM · Pelletizing systems
Plastic Pellet Mill
Compact die-face pellet mill for 100–500 kg/h — one skid, one operator, single-phase-friendly options.
- Output
- 100–500 kg/h
- Screw diameter
- 80 / 100 / 120 mm
- Feedstock
- PP, PE, ABS, PS regrind and agglomerate
- Indicative price
- US$6,800 – 22,000
What this machine does
Not every plant needs 700 kg/h. A furniture factory with 80 kg/h of ABS edge trim, or a workshop buying baled film, needs a machine that starts in the morning and stops at lunch. The TL-PM is built for that: one frame, one panel, one operator, and no foundations beyond a level floor.
Die-face cutting with a water ring keeps the footprint at 3–4 m and gives pellets that flow well in a small injection machine. The trade-off is that filtration is coarser (40–60 mesh) and the screw is shorter, so heavily contaminated or heavily printed material should go to a bigger line.
Maintenance is deliberately simple: the die plate is a bolt-on 200 mm disc, knives are off-the-shelf, and the heater bands are standard sizes available locally. That matters when the machine is 2,000 km from the nearest distributor.
Models and output
| Model | Output | Screw diameter | Main motor | Filtration | Footprint | Weight |
|---|---|---|---|---|---|---|
| TL-PM-80 | 100–150 kg/h | 80 mm | 37 kW | Manual, 40 mesh | 2.8 × 1.2 × 1.5 m | 1.2 t |
| TL-PM-100 | 200–300 kg/h | 100 mm | 55 kW | Hydraulic, 60 mesh | 3.4 × 1.4 × 1.7 m | 1.9 t |
| TL-PM-120 | 400–500 kg/h | 120 mm | 90 kW | Hydraulic, 60 mesh | 4.0 × 1.6 × 1.9 m | 2.7 t |
Output figures refer to LDPE film at 85% bulk density with 3% moisture. Actual output depends on feedstock, flake size and filtration.
Engineering highlights
- Complete unit on one skid: extruder, die-face cutter, water ring and dewatering screen
- 3–4 m footprint, no foundation, single operator
- Bolt-on 200 mm die plate and standard heater bands: local spares
- VFD start with thermal overload protection, safe on weak grids
- Optional 220 V single-phase drive for TL-PM-80
- Wheels and lifting eyes so the unit can be moved between workshops
How the line works
Feed
Regrind or agglomerate is fed by hand or by a small conveyor into the hopper.
Melt
A 26:1–30:1 screw melts the polymer in four zones at 180–240 °C.
Cut
Melt passes a 40–60 mesh screen and is cut at the die face inside a small water ring.
Dewater
A slotted screen and a small blower take pellets to 0.5% surface moisture.
Where it runs
- Injection moulding sprue and reject recycling
- Small film and bag recycling workshops
- Pilot plants and material trials
- Furniture and profile edge-trim recovery
- Agricultural film collection points
Options and upgrades
- Hydraulic screen changer instead of manual
- Hopper dryer and automatic loader for wet flake
- Extra die plates in 2.5 / 3 / 4 mm
- Mobile frame with pneumatic tyres
- Voltage customisation 220 / 415 / 440 V
Questions buyers ask
Can it run on 220 V single phase?
Only the TL-PM-80 with the single-phase option, and output drops to about 80 kg/h because the motor is limited to 22 kW. For 100 kg/h and above, three-phase 380 V is required.
How noisy is it in a small workshop?
About 78–82 dB(A) at one metre, mostly from the cutter and the blower. That is below the 85 dB(A) action level but conversation is difficult; we supply a cutter guard liner that brings it to 74–76 dB(A).
What is the warranty and spare-parts situation?
Eighteen months on the machine, three years of spare-parts availability. A wear kit (knives, heater bands, screen pack, seals) ships with every unit and costs about US$380 to replenish.
Related machines
Other platforms in the range
TL-SJExtrusion granulating
Single Screw Plastic Granulator
The workhorse pellet extruder for PP, PE and ABS regrind — 150 to 700 kg/h with one hardened screw.
- Output
- 150–700 kg/h
- Indicative price
- US$12,500 – 46,000
TL-WRPelletizing systems
Water Ring Pelletizer
Die-face cutting inside a water ring — 100 to 1,000 kg/h in 6 m of floor space, no strand bath.
- Output
- 100–1,000 kg/h
- Indicative price
- US$18,500 – 52,000
TL-FKRecycling lines
Flakes Pelletizing Machine
Force-fed single screw for washed HDPE and PP flake — 300 to 1,000 kg/h at 0.26–0.36 kWh/kg.
- Output
- 300–1,000 kg/h
- Indicative price
- US$28,000 – 72,000
Need a line sized to your material?
Plastic Pellet Mill
Send the polymer, contamination level and target output. You get a model recommendation, power estimate and price range within one working day.
- Reply within 1 working day
- Sample test before you commit
- Factory visits and live video trials by appointment.
Tell us what you need to granulate
Six fields is enough for a first recommendation. Drawings, layout and a firm price follow after the material sample is tested.