Plastic pelletizing machine
塑料造粒机
The complete unit that melts, filters and cuts polymer into pellets. Specify screw diameter, L/D ratio, filtration area and cutter type — not motor power alone.
See the matching machineEquipment index · 9 core product terms + 5 industry terms
Nine phrases buyers use for the same purchasing decision, mapped to the machine or the line each one actually names — plus the specifications that separate them.
14 defined terms on this page, each with its own citable definition.
Terminology
These overlap heavily in real enquiries. The useful question is not which word is correct, but whether the quotation covers one machine, a pelletizing stage or the whole plant. Prices on this site are indicative FOB Qingdao for a base configuration.
塑料造粒机
The complete unit that melts, filters and cuts polymer into pellets. Specify screw diameter, L/D ratio, filtration area and cutter type — not motor power alone.
See the matching machine塑料造粒机(通用叫法)
The most widely used trade name for the recycling extruder. On this site it covers all 12 platforms from 100 to 3,000 kg/h of finished pellets.
See the matching machine塑料挤出造粒机
A granulator named after its melting stage: feed is plasticised in a screw, pushed through a screen changer and die head, then cut at the die face or as strands.
See the matching machine塑料回收设备
The umbrella term for every machine in a reprocessing plant: size reduction, washing, drying, extrusion, melt filtration, cutting and bagging.
See the matching machine塑料回收机
Buyers usually mean one machine with this phrase. Confirm the scope before comparing two quotations: a single extruder and a full line are not comparable on price.
See the matching machine废塑料造粒机
A granulator configured for post-consumer feed. Below 2% contamination a single screw is enough; 2–8% calls for two stage venting; above 8% needs washing first.
See the matching machine塑料颗粒机
An informal phrase, usually a compact die-face unit. The TL-PM plastic pellet mill covers this need at 100–500 kg/h on a 3 m skid.
See the matching machine塑料造粒生产线
Feeder to silo: forced feeding, extrusion, two-stage filtration, cutter, dewatering and storage. Output is measured in finished bagged pellets, not screw throughput.
See the matching machine塑料回收生产线
Bale-to-pellet scope: sorting, crushing, washing, drying, pelletizing and water treatment. The TL-GPL plant is delivered as one package with one warranty.
See the matching machineTerminology
These describe the business or the facility rather than a machine. They belong in background pages and briefs, not in a model number.
塑料机械
All equipment that forms or reprocesses polymer. TENGLONG works in the reprocessing segment: granulators, pelletizers and their upstream washing lines.
See the matching machine再生机械
Machines that turn waste back into a usable feedstock. Energy per kilogram and contamination tolerance decide whether the plant is viable.
See the matching machine塑料挤出机
The melting heart of every granulation line. Single screw for known clean polymers, co-rotating twin screw for filled or reinforced compounds.
See the matching machine塑料回收厂
The facility, not a product. A 500–3,000 kg/h plant needs a bale breaker, washing line, water treatment, pelletizing and bagging under one layout.
See the matching machine塑料造粒方案
A configuration proposal, not a machine: feed analysis, model choice, test run, layout, voltage, spares and commissioning in one document.
See the matching machineQuestions
Each answer is written to stand on its own when quoted.
Use the material and the target output instead. State the polymer, its form, contamination level, moisture, kg/h, voltage and destination country. That is enough for a model recommendation within one working day, and it avoids the granulator-versus-pelletizer ambiguity entirely.
In trade usage they overlap. Strictly, a granulator melts, filters and cuts as one machine, while a pelletizer can mean only the cutting head — water ring, strand or underwater. When specifying, describe the feed form and the pellet shape you need rather than relying on either name.
For the TL-GPL turnkey plant: crushing, hot washing, dewatering, drying, pelletizing, water treatment and bagging at 500–3,000 kg/h, plus commissioning. Indicative FOB Qingdao pricing starts at US$85,000 for the base configuration; electrical standard, filtration and cutter type move the final figure.
Continue
Follow the equipment chain, or open the machine pages for specifications and price ranges.
Next step
Polymer, form, contamination, target output, voltage and country are enough for a model recommendation within one working day.
Six fields is enough for a first recommendation. Drawings, layout and a firm price follow after the material sample is tested.