CE marked · ISO 9001:2015 · 18-month warranty

8 industries

Applications: what each industry actually needs

The same polymer behaves differently as film, flake or lump. These pages describe the feed form, dirt load and pellet specification of eight industries, and the machine we normally quote for each.

Packaging film and bags

LDPE and LLDPE film is light, inked and often wet. Compactor feeding and two vacuum vents matter more than screw diameter.

Feedstock
LDPE, LLDPE, printed film, shopping bags
Output
200–800 kg/h

What the line needs

  • Bulk density below 100 kg/m³, so a compactor is mandatory
  • Ink volatiles need two venting stages or the pellet smells
  • 80 mesh filtration removes paper labels and sand
  • Water-ring cutting keeps the line under 10 m

Blow moulding and bottles

HDPE bottle regrind is dense and clean, but caps and labels raise the dirt load. Force feeding plus 100 mesh gives a pellet that blow moulders accept.

Feedstock
HDPE bottles, jerry cans, caps
Output
300–1,000 kg/h

What the line needs

  • Label and cap separation upstream
  • 100 mesh filtration for speck-free pellets
  • 3–3.5 mm pellets for steady parison extrusion
  • Moisture below 0.3% before bagging

Injection moulding scrap

Sprue and reject parts are clean, single-grade and available every shift. The right answer is usually a compact machine next to the press, not a central line.

Feedstock
PP, ABS, PS, PC sprue and rejects
Output
100–500 kg/h

What the line needs

  • Small footprint so it can sit beside the machine
  • Cubic pellets for consistent feeding ratio
  • Fast colour change for multi-material plants
  • Low noise — under 80 dB(A) at one metre

Pipe, profile and sheet

PVC and PE pipe scrap is bulky and abrasive. Bimetallic screws and 40–60 mesh filtration keep wear costs predictable.

Feedstock
PVC, PE, PP pipe, profile and sheet trim
Output
250–800 kg/h

What the line needs

  • Bimetallic barrel for filled PVC compounds
  • Strand cutting for cubic, free-flowing pellets
  • Metal detection to protect the screw from fittings
  • Dust extraction at the crusher

PET bottle to bottle

Food-grade rPET is judged on intrinsic viscosity, colour and acetaldehyde. Crystallization and drying decide two of those three.

Feedstock
Post-consumer PET bottles, sheet regrind
Output
500–2,000 kg/h

What the line needs

  • Crystallizer before drying, or the flake fuses
  • 50 ppm moisture maximum in the melt feed
  • Hot-water underwater cutting at 70–85 °C
  • IV loss kept under 0.03 dl/g per pass

Agricultural film recovery

Greenhouse and mulch film arrives wet, sandy and mixed with twine. Two stage melting and filtration is the only stable configuration.

Feedstock
Greenhouse film, mulch film, silage wrap
Output
300–1,200 kg/h

What the line needs

  • Cutter-compactor that tolerates twine and stones
  • 100 mesh filtration with 4–6 hour screen life
  • Two stage venting for 8% surface moisture
  • Heavy-duty wear package on the first screw

E-waste and appliance shells

ABS and HIPS housing scrap usually carries flame retardant and paint. Filtration and venting decide whether the pellet can go back into a housing.

Feedstock
ABS, HIPS, PC/ABS housings, TV backs
Output
250–700 kg/h

What the line needs

  • Two venting stages for paint and flame-retardant volatiles
  • 80–100 mesh to hold back pigment and dust
  • Black or dark pellet grading by colour
  • Modest output, high filtration area

Colour and additive masterbatch

Masterbatch is a dispersion product sold by the gram, so changeover time and pellet consistency matter more than output.

Feedstock
Pigment, TiO2, carbon black, carrier resin, wax
Output
20–500 kg/h

What the line needs

  • High-shear dispersion for 20–60% pigment loading
  • 40–60 minute colour change including purge
  • 1.5–3 mm pellets with ±0.1 mm tolerance
  • Gravimetric dosing on every component

Next step

Need a line sized to your material?

Send the polymer, contamination level and target output. You get a model recommendation, power estimate and price range within one working day.

العربيةAR