CE marked · ISO 9001:2015 · 18-month warranty

· products

Plastic Granulator Machine Comparison: 12 Models from 100 to 3,000 kg/h

One table comparing all 12 TENGLONG granulator and pelletizing platforms: capacity 100–3,000 kg/h, specific energy 0.26–0.50 kWh/kg, prices from US$6,800. Plus the four questions that decide which machine you actually need.

Summary: TENGLONG builds 12 plastic granulator and pelletizing platforms from 100 to 3,000 kg/h, priced from US$6,800 (TL-PM pellet mill) to US$120,000 (TL-PET line). The right machine is chosen by feedstock form and contamination level, not by tonnage — film and woven bags need a cutter-compactor, washed flakes need force feeding, high-contamination waste needs two-stage filtration, and PET needs crystallization plus dehumidified drying.

This page is the index we use when quoting: one table with capacity, specific energy and starting price for every platform, then the four questions that actually decide the specification. Figures are our own factory price ranges as of November 2026, excluding freight and installation.

Which granulator fits which feedstock?

Match the feedstock first, then the tonnage. The table below is the short version of every quotation we send.

Model Capacity (kg/h) Specific energy (kWh/kg) Price from Best for
TL-PM Plastic pellet mill (skid) 100–500 — US$6,800 In-house scrap, small workshops, 3 m footprint
TL-SJ Single screw granulator 150–700 — US$12,500 PP / PE / ABS regrind, 90–150 mm nitrided screw
TL-ST Strand pelletizing line 150–800 — US$16,800 Cubic pellets 2–4 mm, easy visual QC
TL-WR Water ring pelletizer 100–1,000 — US$18,500 Die-face cutting, 40% less floor space than strand
TL-MB Masterbatch granulator 20–500 — US$26,000 20–60% pigment loading, fast colour change
TL-FK Flakes pelletizing machine 300–1,000 0.26–0.36 US$28,000 Washed HDPE / PP flake, 80–100 mesh
TL-TS Twin screw extruder line 300–1,500 — US$38,000 Filled and reinforced compounds, 40:1 L/D
TL-FL Film granulating line 200–800 — US$42,000 LDPE / LLDPE / stretch / agricultural film
TL-2S Two stage granulating line 300–1,200 — US$46,000 High-contamination waste, 60–100 mesh
TL-UW Underwater pelletizer 300–2,000 — US$62,000 PET / PA / masterbatch, spherical 1.2–3 mm
TL-GPL Plastic granules production line 500–3,000 — US$85,000 Turnkey: crush, wash, dewater, dry, pelletize
TL-PET PET pelletizing line 500–2,000 — US$120,000 Food-contact PET, IV loss below 0.03 dl/g

What decides the machine? Four questions, in this order

1. Feedstock form

Film, woven bags and foam bridge inside a plain hopper. They need a cutter-compactor or force feeder: the TL-FL film granulating line for baled or roll film, the TL-FK flakes line for washed flake. Rigid regrind runs on a plain single screw such as the TL-SJ.

2. Contamination level

Above roughly 5% contamination a single-stage 80-mesh screen blinds within hours and die pressure swings. The TL-2S two stage line adds a second filtration stage at 60–100 mesh and holds die pressure stable through the shift.

3. Downstream requirement

Food-contact PET needs crystallization and drying to 50 ppm moisture with IV loss below 0.03 dl/g — that is the TL-PET line. Colour compounding and filled compounds need dispersive mixing, which is the 40:1 L/D TL-TS twin screw.

4. Tonnage, last

Capacity follows screw diameter and drive power. Buying tonnage first is the most common specification error we see: a 300 kg/h request often turns out to need a 500 kg/h frame once moisture and downtime are counted.

What does a granulator cost per tonne of pellets?

Specific energy runs 0.26–0.50 kWh/kg depending on polymer and moisture content; washed flake sits at the low end (0.26–0.36 kWh/kg) and wet film at the high end. At US$0.12/kWh that is US$31–60 of electricity per tonne of pellets — over a five-year run often a larger cost line than the machine itself. Ask every supplier for kWh/kg measured on your material, not on dry virgin resin.

What is not on this page

Prices, not quotations. Freight, foundations, water treatment, spare-parts stock and installation are quoted separately. Send the material, the contamination level and the target tonnage, and the configuration comes back with a price inside 24 hours.

Frequently asked questions

What capacity do I need for 500 kg/h of LDPE film?

A 600–700 kg/h rated film line. Film bulk density reduces effective throughput by 15–25% against the nameplate figure, so sizing exactly at 500 kg/h leaves no margin for wet or baled feedstock.

Can one machine run both PP and PE?

Yes on the TL-SJ single screw and TL-ST strand lines. Barrel setpoints differ by roughly 15–25 °C, and PE film usually needs a deeper feed zone than PP regrind.

Water ring or strand pelletizing — which should I choose?

Water ring (TL-WR) for higher output and a footprint about 40% smaller than strand cutting. Strand (TL-ST) when you want cubic pellets and the simplest possible visual quality check.

What is the delivery lead time?

30–45 days for standard single machines and 60 days for turnkey lines, ex-works Linyi (TENGLONG production schedule, 2026). Sea freight and installation add 3–6 weeks depending on destination port.

Is CE marking included?

Yes. Every line ships with a CE Declaration of Conformity and is built under an ISO 9001:2015 quality system. Electrical configuration is adapted per destination: 380 V / 50 Hz for the EU, 440 V / 60 Hz for North America.

Who wrote this

TENGLONG Plastic Machinery, Linyi, Shandong, China. Founded 2016, 18,000 m² plant, 30-plus staff, 820-plus granulating lines delivered to 46 countries. CE marked, ISO 9001:2015. Last updated 2026-11-06 — price ranges are factory ex-works and change with steel and drive pricing.

Related reading

العربيةAR