CE marked · ISO 9001:2015 · 18-month warranty

Equipment index · 13 polymer and feed-form terms

Choosing a granulator by polymer and feed form

The polymer sets the temperature profile and drying requirement; the physical form sets the feeding and filtration. Both have to be right before capacity means anything.

13 defined terms on this page, each with its own citable definition.

Terminology

By polymer

Ask for the temperature profile, the drying specification and whether the recipe includes filler. Those three answers identify the platform faster than the polymer name alone.

PP granulator

PP 造粒机

Runs 10–15 °C hotter than LDPE. Clean PP regrind works on a single screw; CaCO3-filled PP moves to a twin screw for dispersion.

See the matching machine

PE granulator

PE 造粒机

The largest share of recycling enquiries. Film-grade PE needs a compactor feeder; bottle or crate flake needs a force feeder.

See the matching machine

LDPE granulator

LDPE 造粒机

Low-density film and stretch wrap. The TL-FL line uses a cutter compactor and 80 mesh filtration at 200–800 kg/h.

See the matching machine

HDPE granulator

HDPE 造粒机

Rigid bottle, pipe and crate flake. Washed HDPE flake runs on the TL-FK force-fed line at 300–1,000 kg/h, 0.26–0.36 kWh/kg.

See the matching machine

PET granulator

PET 造粒机

Needs crystallisation, dehumidified drying to 50 ppm and vacuum venting. The TL-PET line holds IV loss below 0.03 dl/g at 500–2,000 kg/h.

See the matching machine

PVC granulator

PVC 造粒机

Heat-sensitive: narrow temperature window, corrosion-resistant contact parts, and careful stabiliser dosing to avoid degradation.

See the matching machine

ABS granulator

ABS 造粒机

Appliance and e-waste shells. Drying matters, and flame-retardant grades need careful temperature control and good venting.

See the matching machine

PS granulator

PS 造粒机

Clean PS regrind processes readily on strand cutting; EPS foam is a different job and needs compaction before extrusion.

See the matching machine

Terminology

By feed form

This is where most wrong quotations start: the polymer is named, but the form — film, bag, flake or bottle — is left out.

Plastic film granulator

薄膜造粒机

A compactor-fed single screw line for low-bulk-density film; without the compactor the screw starves and output collapses.

See the matching machine

Woven bag granulator

编织袋造粒机

PP woven bags and raffia carry printing ink and sewing thread, so compaction, venting and 80 mesh filtration are specified together.

See the matching machine

Greenhouse film granulator

大棚膜造粒机

Agricultural film carries soil and moisture. Washing and squeezing upstream protect the screen changer from blinding.

See the matching machine

Jumbo bag granulator

吨包袋造粒机

Thick woven FIBC fabric needs a shredder before the compactor, and higher torque than post-industrial thin film.

See the matching machine

PET flake granulator

瓶片造粒机

Washed bottle flake needs a force feeder, deep vacuum venting and either strand or underwater cutting, with IV held as the key quality number.

See the matching machine

Questions

What buyers ask next

Each answer is written to stand on its own when quoted.

Can one granulator handle PP and PE on different days?

Yes. PP runs 10–15 °C hotter than LDPE; store both recipes in the PLC and the change is a five-minute temperature ramp plus a purge. What you cannot mix is colour: dark to light takes 40–60 minutes of cleaning.

Why is PET the most demanding polymer to pelletize?

Moisture hydrolyses PET at melt temperature and lowers intrinsic viscosity, which decides whether the pellet can be used for bottle-grade products. Crystallisation prevents sticking in the dryer, desiccant drying to about 50 ppm removes the water, and vacuum venting catches what remains.

Continue

Related machines and equipment indexes

Follow the equipment chain, or open the machine pages for specifications and price ranges.

Next step

Not sure which term fits? Describe the material instead

Polymer, form, contamination, target output, voltage and country are enough for a model recommendation within one working day.

Tell us what you need to granulate

Six fields is enough for a first recommendation. Drawings, layout and a firm price follow after the material sample is tested.

Used only to answer this enquiry. No lists, no resale.

العربيةAR