A turnkey granules line takes baled bottles, containers or film to bagged pellets in five matched stages: crushing, pre-washing, friction washing, dewatering and drying, then extrusion and pelletizing. The TL-GPL runs 500 to 3,000 kg/h and is commissioned as one system.
Most projects fail on washing, not extrusion. Flake with 3% residual moisture and label glue blinds a 100 mesh screen in 15 minutes. One supplier guaranteeing the interface conditions — flake size, moisture and buffer capacity — removes the argument between four separate vendors.
What turnkey has to mean
- Five stages matched to a target of below 0.5% contamination and 2% moisture.
- Conveying, water treatment and bagging are part of the line.
- One warranty covers interfaces that four suppliers would dispute.
- Civil works, incoming power and wastewater treatment are excluded.

Five stages, one system
A plastic granules production line takes baledPET bottles, HDPE containers, LDPE film or PP bags and delivers bagged pellets. The TL-GPL does that in five matched stages: crushing, pre-washing, friction washing with heated water, mechanical dewatering and thermal drying, then extrusion and pelletizing.
The line also includes conveying between stages, water treatment and a bagging station. It is commissioned as one system, so each stage is matched to the next. That is the definition of turnkey that matters: not merely that one supplier sold the equipment, but that the interfaces are guaranteed as a package.
Output runs from 500 to 3,000 kg/h of finished pellets, with indicative FOB Qingdao prices from US$85,000 to US$260,000. Lead time is 45 to 60 days and the warranty is 18 months.
Where projects fail

Most recycling projects fail on the washing stage, not the extruder. A line that produces clean-looking flake with 3% residual moisture and label glue will blind a 100 mesh screen in 15 minutes and give dark, smelly pellets.
The extrusion stage is comparatively forgiving. Given clean, dry flake, an extruder will pelletize it. The difficulty is producing that flake consistently, hour after hour, from a contaminated feedstock.
Matching each stage to the next is the whole job: crushing to 25 to 30 mm, washing to below 0.5% contamination, drying to below 2% moisture, then pelletizing. A supplier who quotes the extruder carefully and treats washing as an accessory has misunderstood the problem.
What one warranty changes
When four suppliers supply four stages, each blames the incoming material from the previous stage. A moisture problem becomes an argument between the dryer and the washing line, and the customer pays for the delay while it is resolved.
With one supplier, the interface conditions — flake size, moisture and buffer silo capacity — are guaranteed as a package. The commissioning team starts the line as a system and signs off on finished pellets, not on individual machines.
The central MCC with per-stage fault logging supports that responsibility. A fault can be traced to a stage without dismantling the line, and remote diagnostics shorten the response when the customer is overseas.
Reading the three model sizes
The TL-GPL-500 runs 500 to 700 kg/h with 280 kW installed, two wash tanks and a press plus two-stage dryer, occupying 32 by 8 m. The TL-GPL-1500 runs 1,200 to 1,800 kg/h with 520 kW, three tanks and a three-stage dryer, occupying 45 by 10 m.
The TL-GPL-3000 runs 2,500 to 3,000 kg/h with 900 kW, three tanks plus ultrasonic cleaning, and occupies 58 by 12 m. All three use an 80 to 100 mesh double-piston changer and water ring or strand pelletizing matched to the polymer.
The indicative prices follow the same progression: from US$85,000 at 500 kg/h, around US$165,000 at 1,500 kg/h and around US$240,000 at 3,000 kg/h, excluding civil works, power supply and wastewater treatment.
What is not included
Civil works, the incoming power supply and wastewater treatment are excluded from the indicative price. These are real costs and should be budgeted before the machine order is placed, particularly for a plant without an existing water permit.
Installation and commissioning travel are also separate in many quotations. Ask for the scope in writing, including the number of commissioning days and what happens if the line does not reach the agreed output.
Our contact page describes how to send the feedstock and target output for a configuration. A turnkey quotation is only useful when it is based on the actual material, because the washing stage cannot be sized from a tonnage figure alone.
The five matched stages
One supplier and one warranty change what ‘turnkey’ means. The table lists every stage that has to be matched.
| Stage | What it does | Target condition |
|---|---|---|
| Crush | Wet granulation to 25-30 mm | Size for washing |
| Wash | Pre-wash then 90 C friction wash | Below 0.5% contamination |
| Dewater and dry | Screw press then hot-air dryer | Below 2% moisture |
| Pelletize | Force feed, 80-100 mesh, cut | 3 mm pellets |
| Bag | Metal detection and weighing | 25 kg or 1 t bags |
Frequently asked questions
Q1: What does a complete plastic granules line include?
Five stages: crushing, pre-washing, friction washing with heated water, mechanical dewatering and thermal drying, then extrusion and pelletizing. Conveying, water treatment and a bagging station are included, and the line is commissioned as one system.
Q2: Why do recycling projects fail at the washing stage?
Because flake with 3% residual moisture and label glue blinds a 100 mesh screen in about 15 minutes and produces dark, smelly pellets. The extruder is forgiving if the feed is clean and dry; producing that feed consistently is the hard part.
Q3: What is not included in the indicative price?
Civil works, incoming power supply, wastewater treatment, freight and local duties. Installation and commissioning travel should be confirmed in writing, along with the number of commissioning days.
Q4: Can I buy only the pelletizing section?
Yes, and about a third of our orders are that. Send flake samples so the extruder can be sized to your actual bulk density and moisture rather than to the nominal throughput of a washing line.
Related pages on this site: granulator types.
If you are working through the same machine family, these are the other 90 C Friction Washing: What Each Stage Removes, Water Use in a Granules Line: 0.8 to 1.2 m3 per Tonne, 280 to 900 kW: Power Planning for a Turnkey Line and A Granules Line That Grows from 500 to 3,000 kg/h.
About the author
Zhou Gong (周工) is the recycling machinery engineer at TENGLONG Plastic Machinery in Linyi, Shandong — a plant of 18,000 m² with 30-plus staff, 12 platforms and 820-plus installations across 46 export markets. The extruder is the easy part. I spend my time on the stage before it. Where a figure is quoted here it has been measured or published with a date attached; nothing in this article is an estimate.
The quickest way to a real answer is to send the feed form, the contamination level and the throughput you need. A model and a price range come back within one working day, the trial on 10–20 kg of your material is free, and a result that misses the agreed output by more than 5% leaves the deposit refundable.