CE marked · ISO 9001:2015 · 18-month warranty

· products · By

Plastic Agglomerator Machine: What It Does and Its Limits

A plastic agglomerator machine densifies film and bag scrap so a screw extruder feeds steadily. Where it belongs in a line, and where it does not.

Add a plastic agglomerator when your feedstock is light and your extruder is starved. The machine compacts agricultural film, woven bag and fibre into dense chunks at roughly two to four times the incoming bulk density, and the extruder behind it then runs at its rated output instead of at the fraction that loose film allows.

The case against it is just as simple. Rigid plastic that is already clean and dry does not need densifying, and an agglomerator in front of it only adds heat history and a place for contamination to hide. Check what your material looks like in a bulk-density bag before you specify anything.

Four checks before you specify an agglomerator

  • Measure bulk density first. Below roughly 80 kg/m³ an extruder will starve; above it, densifying is usually money spent for nothing.
  • Densifying does not clean. A compacted chunk of dirty film produces a dirty pellet, and the contamination is now hidden inside the chunk.
  • No melt means no filtration. An agglomerator is a handling step, not a screen change.
  • Published 2026 listings pair 300–500 kg/h with 55–110 kW and a 1,000 rpm rotor; compare the rotor diameter, not the hopper volume.
3D render of a TENGLONG machine with a top-mounted hopper, a curved extraction pipe, a drive unit and a freestanding control cabinet
3D render of a TENGLONG machine with a top-mounted hopper, a curved extraction pipe, a drive unit and a freestanding control cabinet. Used here as a visual reference for where densification belongs in a recycling line. Rendering, not a photograph of a customer plant.

What a plastic agglomerator machine actually does

Rendered scene of a TENGLONG trade-show stand with orange machinery and a crowd of visitors
Rendered scene of a TENGLONG trade-show stand with orange machinery and a crowd of visitors. Shown here as production context. Rendering, not a photograph of a customer plant.

A plastic agglomerator machine is a densifier, not a shredder and not an extruder. It takes low-bulk-density material — film, woven bag, fibre, non-woven offcuts — and compresses it into dense chunks by friction heat and cooling, so that the next machine can feed it at a rate the material would never reach on its own.

The problem it solves is simple to state and expensive to ignore. Agricultural film arrives at 20–60 kg/m³. A single screw extruder needs a continuous, compacted column of material at the feed throat. Loose film bridges, starves, and overheats while sitting in the barrel waiting for the next batch. Agglomerated chunks feed predictably, and they melt with less energy because the heat reaches the material instead of the void.

Mechanically, an agglomerator is a heated chamber with a rotating rotor carrying knives, a fixed bed knife, and a discharge opening. Friction between rotor and material raises the temperature until the polymer softens enough to adhere to itself. Air is then drawn off, and the material is cut into chunks as it leaves the chamber. What you receive is not a pellet — it is a feed material with roughly two to four times the bulk density of the film you started with.

This is why the granulator type index lists the agglomerator as a separate product from the pelletizing lines: it sits one step earlier in the chain, and it changes what the pelletizing line downstream is actually capable of.

The four cases where an agglomerator earns its place

In practice we see four situations, and they are worth separating because the economics differ sharply.

Film and woven bag at low bulk density. This is the canonical case. Loose agricultural film at 60 kg/m³ can starve a screw that would handle the same tonnage of dense regrind without complaint. Densifying first is the difference between a line that runs and a line that idles.

Blended feed with mixed forms. When film, bags and rigid offcuts share a line, the rigid fraction dominates the feeding behaviour and the film waits. Agglomerating the whole blend evens the bulk density so every component arrives at the throat together.

Transport and storage between sites. Densified material costs less to move per tonne and occupies less warehouse space. For a plant that ships regrind to a compounding plant, this is a freight line item, not a production item, and it is often the larger number.

Feeding a screw that needs steady pressure. Some applications — filler loading, masterbatch work — need a metered, dense feed. The agglomerator is upstream of that metering.

The case that is not on this list is rigid plastic. Crates, bottles and moulded scrap are already dense enough. Putting an agglomerator in front of rigid regrind adds energy and capital for no gain.

What an agglomerator does not do

An agglomerator does not clean material. It does not remove labels, glue, oil or grit, and it will happily densify a contaminated batch, which concentrates the contamination rather than removing it. If your feedstock needs washing, washing happens first — the washing line equipment index covers that sequence.

It does not melt the material either. The temperatures involved soften the polymer so it holds its shape, but there is no extrusion and no melt filtration. Quality control on the pellets happens downstream in the pelletizing line, and the agglomerator is upstream of all of it.

Finally, it is not a way to make contaminated plastic saleable. A compacted chunk of dirty film produces a dirty pellet. Densification changes handling, not chemistry.

Where an agglomerator sits in the recycling chain

The position of the agglomerator is fixed by what happens to the material after it, so it is worth seeing the whole chain before deciding anything.

Stage Machine What changes Bulk density
Feed preparation Crusher / shredder Size reduced to 25–30 mm Unchanged
Densification Agglomerator Material compacted and chopped into chunks Roughly 2–4× higher
Extrusion Single or twin screw granulator Melt formed and filtered Pelletised
Cutting Strand, water ring or underwater Pellets cut and dried Final product

Frequently asked questions

Q1: Is a plastic agglomerator the same as a compactor?

They are the same machine sold under two names. The European and Asian markets tend to say agglomerator, North American buyers tend to say compactor. Some suppliers also use densifier for the same machine. When you compare quotations, compare the rotor diameter, the installed power and the rated throughput, not the product name.

Q2: Does an agglomerator melt the plastic?

No. Friction heat softens the material enough for it to hold the shape of a chunk, but there is no melt and no extrusion. The polymer is not chemically altered. If your feedstock is PVC, the machine has to be configured for it and the residence time kept short, because heat is what degrades PVC.

Q3: How much does an agglomerator cost?

Chinese supplier listings for 2026 put a 300 L machine with 55 kW at about CNY 32,000, a 500 L machine with 90 kW at about CNY 52,000, and an 800 L machine with 110 kW at about CNY 65,000, with rated throughput of 300–500 kg/h at 1,000 rpm rotor speed. A European or American build costs substantially more. Freight, installation and spares are quoted separately.

Q4: Will an agglomerator make my output figure true?

Often, yes. Catalogue output assumes 85% bulk density, 3% moisture and moderate contamination. Wet film at 60 kg/m³, flake with 8% water or a very fine screen can each cut real output by 20–40%. If your shortfall is a feeding problem rather than a screw problem, densifying upstream fixes it without buying a larger machine.

Related pages on this site: plastic recycling equipment, the 12-platform comparison and auxiliary equipment.

If you are working through the same machine family, these are the other How to Size a Plastic Agglomerator Machine for Film Scrap, Plastic Agglomerator Maintenance: Knife Clearance and Uptime, Plastic Agglomerator in a Film Recycling Line: Layout and How to Test a Plastic Agglomerator Supplier Before You Pay.

About the author

Zhou Gong (周工) is a recycling machinery engineer at TENGLONG Plastic Machinery in Linyi, Shandong, where 30-plus staff work across 18,000 m² and 12 machine platforms covering 100 to 3,000 kg/h. The first number I check on an agglomerator order is the rotor diameter against the feed opening, because most undersized machines were sold on peak hopper volume rather than on what the rotor can actually take. Every figure used here has been measured on a machine or taken from a dated published source, not from a brochure.

Send the material form, the contamination level and your target output to our engineering team and you get a model and a price range within one working day. A test run on 10–20 kg of your own material is free, and if the measured output misses the agreed figure by more than 5%, the deposit is refundable.

Related reading

العربيةAR