CE marked · ISO 9001:2015 · 18-month warranty

· products · By

How to Choose a PET Washing Line for Your Material

Choosing a PET washing line: size from feed reliability, match the process to the buyer, and the four decisions that set the economics.

Start with the material and the buyer, not with the capacity. A fibre-grade line and a bottle-to-bottle line share the same name and almost nothing else: the buyer who needs PVC below 50 ppm and 99.5%+ purity has specified optical sorting, and the buyer who wants clean flake for a fibre process does not need to pay for it. Capacity follows from feed reliability, and each stage should sit 20–30% above your real target.

The decision that is hardest to reverse is water treatment. Without recirculation the line consumes over 3 m³ per ton, which is a cost problem and, in most jurisdictions, a permit problem; with a treated closed loop it is 0.8–1.2 m³ per ton. Everything else on the line can be added to later. Water treatment is much harder to add to a plant that was built without the space for it.

The four decisions

  • Capacity: 500 / 1,000 / 2,000 / 3,000 kg/h, with each stage 20–30% above target.
  • Wash process: cold wash or hot caustic, decided by whether the flake is sold as fibre or as bottle-to-bottle.
  • Purity route: float tanks alone, or float tanks plus optical sorting for PVC below 50 ppm and 99.5%+ purity.
  • Water treatment: with recirculation at 0.8–1.2 m³ per ton, or without at over 3 m³ per ton.
Rendered scene of a TENGLONG workshop with a white and orange machine and a group of visitors
Rendered scene of a TENGLONG workshop with a white and orange machine and a group of visitors. Shown here as production context. Rendering, not a photograph of a customer plant.

Start with the material, not the capacity

Buyers arrive with a number — “I want a 2,000 kg/h line” — and the number is usually the least important thing in the conversation.

Start with what arrives at the weighbridge. Bale weight and composition determine the real throughput: a line processing compressed bales containing bottles, caps and labels runs at a different rate from one processing loose bottles, and a mixed bale with a high proportion of non-PET items will run far below its nameplate because the pre-sort stage has to handle the difference.

Then establish the contamination level, because it decides the pre-cleaning requirement and the filtration duty. Below about 2% non-melting contamination a single screw handles it at 60–80 mesh. Between 2% and 8% a two-stage line with a second filtration stage at 60–100 mesh holds die pressure stable. Above 8%, washing is cheaper than filtering and the material has to be washed before it is pelletized.

The published sizing rule is that each stage should be sized 20–30% above the target throughput, because real lines run at 60–80% of nameplate regardless of how carefully they are matched.

Match the process to the buyer, not to the ambition

Rendered scene of a TENGLONG workshop with a green conveyor and visitors looking over the line
Rendered scene of a TENGLONG workshop with a green conveyor and visitors looking over the line. Shown here as production context. Rendering, not a photograph of a customer plant.

The second question is who buys the flake, and this determines the process more than anything else.

A fibre producer — for polyester or strapping — needs consistent, clean flake at a price. Cold wash serves them. Published purity is 98–99% and energy cost is low.

A bottle-to-bottle converter working under EU PPWR rules needs hot wash plus optical sorting, with PVC below 50 ppm, no detectable glue or oil and purity above 99.5%. That is a different line and a different capital base.

The trap is building for the ambition you might have. If food grade is even a maybe in your plan, build for hot wash now, because the upgrade path does not exist cheaply. If food grade is genuinely a distant maybe, spending that capital on optical sorting or on more drying capacity will earn more in the meantime.

One published comparison makes the point sharply: a 1,000 kg/h line quoted at US$150,000–300,000 for cold wash, US$200,000–400,000 with hot wash and drying, and US$350,000–600,000 for full food grade. The step from the middle band to the top band is roughly the cost of the entire cold-wash line.

Five questions that decide the economics

Where does the material come from, and is it reliable? A washing line is a fixed-cost asset and a feed problem is a utilisation problem. A plant that cannot guarantee 1,500 kg/h of consistent feed is carrying a 2,000 kg/h line at 40% and paying for it.

Is the water treatment included? Budget 15–25% of the line cost for it. A washing line without closed-loop recirculation drinks more than 3 m³ per ton and discharges contaminated wastewater, which is a permit issue in most jurisdictions.

What is the electricity price? The published line figures are 18–30 kWh per ton of flake. At a given tariff, that energy cost per ton is a fixed deduction from whatever you can sell the flake for, and it changes which configurations make sense.

Who does the optical sorting? If the customer needs 99.5%+ purity, an optical sorter is in the line and it is a significant capital item. If you do not have one, you are selling into the fibre market.

What happens to the rejects? The floating fraction skimmed from the float tanks is a saleable mixed plastic stream in its own right, and the fines from the vibrating screens are not. Both need a destination, and the buyer of the rejects is part of the business model.

The questions worth asking a supplier

Four questions separate a supplier who has built these lines from one who is selling a configuration.

“What is the real throughput on my material, measured over four hours?” The answer should be a weighed number on your material, not a catalogue figure. We quote finished, bagged pellets averaged over four hours, which is 3–6% below extruder throughput.

“What does the water balance look like, and is water treatment in this quotation?” A supplier who cannot answer that has not designed the line.

“How much of the line is sized 20–30% above the rest?” The answer should be the pre-sort and the dewatering, because those are the stages that vary most with material.

“Can I see the foundation drawing and the layout before I pay the deposit?” We send a foundation drawing with the order and check it against your site photographs before shipping. A level, load-bearing concrete floor is enough up to a 120 mm screw; larger lines and two-stage machines need isolated pads or vibration dampers.

Choosing a PET washing line: the four decisions

Four decisions, and the fact that decides each one. The last of them is the one that is hardest to undo.

Decision Options What decides it
Capacity 500 / 1,000 / 2,000 / 3,000 kg/h Feed reliability first, then each stage 20–30% above target
Wash process Cold wash or hot caustic wash Who buys the flake: fibre, or bottle-to-bottle
Purity route Float tanks, or float tanks plus optical sorting PVC below 50 ppm and 99.5%+ purity need optical sorting
Water treatment With recirculation, or without Without it: over 3 m³ per ton and a permit problem

Common questions, with short answers

Q1: How do I size a PET washing line?

Start from the material that reliably arrives at the weighbridge, not from a target tonnage. Then size each stage 20–30% above that throughput, because real lines run at 60–80% of nameplate. The pre-sort and the dewatering are the stages that vary most with material, so they are the ones to size generously.

Q2: Do I need optical sorting?

Only if your customer needs 99.5%+ purity and PVC below 50 ppm, which is the food-grade bar. Without optical sorting, a good line reaches 98–99% purity, which serves fibre, strapping and sheet producers. Optical sorting is a significant capital item and it is the single largest step between the US$200,000–400,000 and US$350,000–600,000 bands.

Q3: What is the single biggest cost I forget on a washing line?

Water treatment. Budget 15–25% of the line cost for it. Without closed-loop recirculation the line drinks more than 3 m³ of water per ton and discharges contaminated wastewater, which in most jurisdictions is a permit violation within weeks rather than a fine later.

Q4: How much does the line cost to run per ton of flake?

Published energy use for a complete PET washing line is 18–30 kWh per ton, with water at 0.3–1.5 m³ per ton with recirculation. Both are fixed deductions from whatever you can sell the flake for, so the tariff and the water price belong in the calculation before the machine is chosen, not after.

Where this fits in the wider range: turnkey pelletizing solutions, applications by industry and plastic granules production line.

Read next, if the same model is going on your line: PET Washing Line: What Each Stage Removes and Costs, Sink-Float Separation Tank: How PET Is Separated, Hot Washing Machine for PET: Temperature and Caustic and PET Washing Line Maintenance: Five Costly Failure Modes.

About the author

Zhou Gong (周工) is a recycling machinery engineer at TENGLONG Plastic Machinery in Linyi, Shandong, where 30-plus staff work across 18,000 m² and 12 machine platforms covering 100 to 3,000 kg/h. The decision I refuse to let clients get wrong is water treatment, because it is the one choice that is cheap on day one and expensive on day five hundred. Every figure used here has been measured on a machine or taken from a dated published source, not from a brochure.

Send the material form, the contamination level and your target output to our engineering team and you get a model and a price range within one working day. A test run on 10–20 kg of your own material is free, and if the measured output misses the agreed figure by more than 5%, the deposit is refundable.

Related reading

العربيةAR