A hot air hopper dryer blows heated air through the material and relies on the factory’s own humidity to set the ceiling on how dry the granules can get. That is fine for PE and PP, which do not absorb moisture in a way that matters, and it is the wrong tool for PET, PA, PC and PBT. Those grades bind water chemically rather than physically, and the humidity in the building becomes part of the specification of your product.
A dehumidifying dryer dries the air first, with a desiccant rotor, and then uses that air as the drying medium. Published dew point figures go below −40 °C and up to −45 °C. For PET that difference is not a preference: PET loses 0.01 dl/g of intrinsic viscosity for every 100 ppm of moisture, which is the difference between a food-grade pellet and a downgrade.
Two dryers, two mechanisms
- Hot air hopper: cheap, simple, and limited by the humidity of your own building.
- Dehumidifying dryer: desiccant rotor dries the air first; published dew point below −40 °C, up to −45 °C.
- PET, PA, PC and PBT are the grades where the difference shows: 0.01 dl/g of IV lost per 100 ppm of moisture.
- Published 2026 prices: US$4,490–4,980 for a 50 kg hopper unit and US$8,891 for a 100 kg hopper.

What a hot air dryer actually does
A hot air hopper dryer circulates heated air over the material in a hopper and blows the moisture out. It works, and for many materials it is entirely adequate.
What it cannot do is control the moisture it delivers to the material. It heats the air and it pushes air through, but the incoming air carries whatever humidity the factory has. In a humid climate, or in winter, or at night, the air entering the hopper is more humid than the air leaving it — and on a hygroscopic polymer, the material absorbs moisture from that air as readily as it releases it.
This is the mechanism behind a common and frustrating complaint: a hopper dryer that appears to work perfectly in the morning and cannot reach specification in the afternoon, or in a wet month. The machine is not at fault. The air is.
What a dehumidifying dryer does differently

A dehumidifying dryer separates the two jobs. It uses a desiccant rotor — a honeycomb of molecular sieve — to dehumidify the air first, and then uses that dry air to dry the material.
The published specification figures for this class of machine are impressive and worth quoting: a dew point below −40 °C under ideal conditions, up to −45 °C on the better units, with hopper capacities from 12 kg to 500 kg, heating power from 4 to 18 kW and dehumidifying air from 40 to 400 m³/h. A 50 kg hopper unit is listed at US$4,490–4,980 and a 100 kg unit at US$8,891.
The consequence is that the drying result stops depending on the weather. The air going onto the pellets has a dew point the machine controls, not one the building determines.
The desiccant rotor works on a cycle: it absorbs moisture in the drying zone, is regenerated by heated air in a separate zone, and then cools before returning to service. It is a consumable in the same way a screen pack is, and it is the part that needs a schedule.
Which polymers genuinely need one
This matters, because a dehumidifying dryer is not free and it should not be bought for a material that does not need it.
PET is the case that matters most. Published guidance is that PET must be dried to below 50 ppm after crystallisation, and that PET loses 0.01 dl/g of intrinsic viscosity for every 100 ppm of moisture. At 300 ppm, that is 0.03 dl/g — and for food-contact material, the difference between passing and failing.
PA needs one too. The published figure is below 0.1% moisture, and the symptom of not meeting it is bubbles and weak pellets rather than a yellow tint.
PC, PBT and other hygroscopic engineering grades behave like PA — the damage is in the melt, and it shows up as splay, brittleness and reduced mechanical properties rather than as discolouration.
PE and PP do not in the same way. They are non-hygroscopic and a hot air dryer handles them. The published answer on our own FAQ is direct about this: a dehumidified dryer is needed for PET and PA, and for washed flake bought from a supplier a hopper dryer is sometimes enough.
And the published guidance is worth repeating because it is a mistake we see often: add a dehumidified dryer, not just a hot hopper. A hot hopper on PET is not a compromise — it is the wrong machine.
Cost, and what you are paying for
The published price range is US$3,400 for a 1,000 kg hopper unit up to about US$8,900 for a 100 kg unit, with a 50 kg unit around US$4,500–5,000 and delivery in 7–15 days on those listings.
The interesting part is that this is a modest capital item against the value it protects. PET losing 0.03 dl/g of intrinsic viscosity is not a quality complaint; it is a material that cannot be sold to a bottle-to-bottle converter at all, and it is a batch of material rather than a fault in one bag.
The second thing the money buys is predictability. A plant whose flake moisture depends on the afternoon weather cannot commit to a specification in a contract, and the customers who pay most for food-grade material are exactly the ones who will ask for a moisture figure on every batch.
Drying methods compared for plastic granules
Three drying methods against the three things that matter: mechanism, moisture control, and which polymers need it.
| Method | Mechanism | Moisture control | Suits |
|---|---|---|---|
| Hot air hopper | Heated air over material in a hopper | Depends on factory humidity | PE, PP, in-house scrap |
| Dehumidifying hopper dryer | Desiccant rotor dries the air first | Controlled, below −40 °C dew point | PET, PA, PC, PBT |
| Crystalliser + dryer | Crystallises then dehumidifies | PET to below 50 ppm after crystallisation | Food-contact PET, rPET |
Frequently asked questions
Q1: Do I need a dehumidifying dryer or is a hot air hopper enough?
For PE and PP, a hot air hopper is enough. For PET and PA it is not — the published requirement is PET below 50 ppm after crystallisation and PA below 0.1%, and the guidance is to add a dehumidified dryer rather than just a hot hopper. A hot hopper on PET is the wrong machine, not a cheaper version of the right one.
Q2: What dew point does a plastic dehumidifying dryer achieve?
Published figures put the desiccant honeycomb rotor below −40 °C under ideal conditions and up to −45 °C on the better units. That is what makes the drying result independent of the factory humidity and the weather.
Q3: How much does a dehumidifying dryer cost?
Published 2026 listings show US$4,490–4,980 for a 50 kg hopper unit with 80 m³/h of dehumidifying air, US$8,891 for a 100 kg hopper with 120 m³/h, and US$3,400 for a 1,000 kg hopper. Against the value of a PET batch that keeps its intrinsic viscosity, this is a modest capital item.
Q4: What maintenance does a desiccant dryer need?
Desiccant replacement on a schedule, filter cleaning, and monitoring of the dew point reading to know the rotor is still performing. The rotor is a consumable in the same way a screen pack is, and a rotor past its life shows up as slowly rising moisture rather than as a failure.
Related pages on this site: PET pelletizing line, masterbatch granulator, FAQ on drying PET and PA and the 12-platform comparison.
If you are working through the same machine family, these are the other Dehumidifying Dryer Sizing: Hopper Volume and Airflow, PET Crystalliser and Dehumidifying Dryer: Why Both, Dehumidifying Dryer Maintenance: Desiccant and Filters and How to Buy a Dehumidifying Dryer Without Overpaying.
About the author
Zhou Gong (周工) is the recycling machinery engineer at TENGLONG Plastic Machinery in Linyi, Shandong — a plant of 18,000 m² with 30-plus staff, 12 platforms and 820-plus installations across 46 export markets. I measure the humidity of the building before I measure the dryer, because a hot air dryer in a humid plant is a hot air dryer with a very good specification sheet and no performance. Where a figure is quoted here it has been measured or published with a date attached; nothing in this article is an estimate.
The quickest way to a real answer is to send the feed form, the contamination level and the throughput you need. A model and a price range come back within one working day, the trial on 10–20 kg of your material is free, and a result that misses the agreed output by more than 5% leaves the deposit refundable.