PP and PE waste films feature complex and variable working conditions with high moisture, high oil pollution and high impurity content, placing extremely high requirements on the impurity removal, degassing and plasticization capabilities of film pelletizing equipment. Ordinary single-stage equipment cannot meet high-end mass production standards. Relying on the core advantages of two-stage segmented plasticization, dual precision filtration and dual-stage vacuum degassing, the two-stage PP PE film pelletizing production line is specially adapted to complex dirty material working conditions and has become the most recognized mass production equipment in the high-end film recycling industry. Combined with full-series model parameters and rich field practical experience, this article answers core user questions about model selection, production commissioning, quality control and operation & maintenance, helping manufacturers select equipment scientifically, avoid risks, stabilize production and increase profits.

Q1: How to accurately select the five models of the to match personal production capacity?
Professional Answer: Model selection can be accurately determined by daily output: TL85 for 3-5 tons daily high-quality production; TL100 for 6-10 tons daily stable production; TL130 with the highest cost performance for mainstream 10-15 tons daily mass production; TL160 for 15-20 tons daily medium and large-scale production; TL180 for large-scale industrial park production with daily output over 25 tons. Small and medium models with 33:1 length-diameter ratio achieve finer plasticization for high-end premium particles; large models adopt optimized length-diameter ratios to balance quality and large output, adapting to diverse production demands.
Q2: Why are particles produced by two-stage equipment more suitable for high-end deep processing than single-stage ones?
Professional Answer: Ordinary film pelletizing production lines adopt single-stage melting, single filtration and single degassing, with high probability of residual impurities and moisture, leading to invisible internal bubbles and fine impurities in particles, which easily cause wire breakage, defects and brittleness in deep processing. In contrast, the two-stage PP PE film pelletizing production line realizes rough refining & impurity removal & exhaust in the first stage and fine refining & homogenization & purification in the second stage. Dual filtration and dual degassing ensure layer-by-layer quality control, producing dense, uniform, defect-free particles with stable molecular structure, fully meeting high-standard deep processing scenarios such as precision injection molding and high-end film extrusion.
Q3: Is the daily operation and maintenance difficult? Can it support long-term 24-hour continuous production?
Professional Answer: The equipment features simple operation & maintenance and ultra-low failure rate, fully supporting 24-hour non-stop mass production. The dual-stage load sharing is uniform, and core accessories such as screws, dies and filter screens are made of wear-resistant and anti-corrosion materials, adapting to long-term processing of high-impurity dirty materials. Equipped with non-stop screen changing, intelligent fault early warning and automatic temperature control systems, it has high production fault tolerance. Daily maintenance only requires regular filter screen cleaning and transmission component inspection, no professional technicians on duty needed, and ordinary workers can complete all maintenance operations with strong production stability.
Q4: Does the equipment support mixed PP and PE production? Will it affect finished product quality?
Professional Answer: The equipment perfectly supports mild mixed PP and PE production without strict material sorting, adapting to mainstream mixed material recycling conditions in the market. The two-stage fine plasticization technology is compatible with the melting characteristics of both materials. The particle stability remains up to standard after mixed production without uneven plasticization or deteriorated appearance, greatly reducing customers’ material sorting costs.

Call to Action
If you have personalized questions about model selection, material testing, capacity customization, parameter debugging, after-sales maintenance and accurate quotation of the two-stage PP PE film pelletizing production line, feel free to contact us for free one-on-one professional technical consultation!
WhatsApp/WeChat: +86 15092868822 | Email: [email protected]