The plastic film recycling industry is currently polarized severely: low-end impurity-containing particle production is overcapacity with fierce price involution and meager profits, while high-end pure recycled particles are in short supply with stable market premiums. A large-scale recycling enterprise in Shandong Province has long-term mass recycling of complex dirty materials such as field waste agricultural films, industrial packaging films and PP woven bag films. Previously, the enterprise adopted multiple single-stage film pelletizing production lines, which featured weak impurity removal capacity and poor plasticization effect. The produced particles had excessive bubbles and impurities with inconsistent appearance, and could only be sold to low-end injection molding markets at low prices. The raw material advantage could not be converted into profit advantage, restricting enterprise development. In 2025, the customer fully upgraded to the two-stage PP PE film pelletizing production line, realizing complete product upgrading and profit doubling.

The customer’s original single-stage equipment had prominent production pain points: single-stage plasticization could not completely melt aged colloid and deep impurities in dirty films, resulting in frequent black spots and residual impurities on finished particles; one-time degassing and filtration were incomplete, causing hollow bubbles and brittle particles in high-moisture film granulation, failing to access high-end markets; the equipment had poor adaptability, operating stably only for clean scraps but frequently breaking down with unstable capacity when processing muddy, oily and mixed waste films; high defective rates and severe raw material waste greatly compressed the enterprise’s profit space.
Combined with the customer’s core working conditions of 12-15 tons daily output, high-end premium particle mass production and high-impurity dirty film raw materials, we precisely matched the TL130 model two-stage PP PE film pelletizing production line. This model features 130mm first-stage and 150mm second-stage screw diameter with a 33:1 standard length-diameter ratio, delivering 450-550kg/h PE capacity and 380-450kg/h PP capacity. The capacity perfectly matches the customer’s mass production demand. The standard length-diameter ratio combined with two-stage segmented technology realizes fine plasticization and deep impurity & moisture removal, fully meeting high-end particle quality standards for complex dirty material production.
Since the launch of the full film pelletizing production line, the automatic closed-loop production has been efficient and stable. Various mixed wet, dry, oily and muddy waste films require no fine pretreatment. After automatic feeding and metal detection, materials are dispersed, compacted and preheated for decontamination by the high-speed agglomerator; the first-stage extruder completes preliminary melting, coarse filtration and primary degassing to remove most impurities and moisture; materials enter the second-stage host for fine homogeneous plasticization, and thorough secondary precision filtration and ultimate degassing purification eliminate fine impurities and residual gases completely; finally, water ring pelletizing and dewatering drying produce recycled particles that are round, plump, transparent, bubble-free and spot-free with stable high-end appearance.
After six months of operation, the customer reported remarkable upgrading effects: the two-stage technology completely solves the industry problems of particle bubbling, excessive impurities and inconsistent appearance, making finished products fully compliant with high-end market standards with significantly increased sales prices; the equipment can directly produce high-end particles from low-cost waste dirty films, greatly reducing raw material procurement costs; the two-stage equipment features uniform load and ultra-low failure rate, supporting 24-hour stable continuous production with effective capacity increased by over 30%; high automation reduces labor input and overall production costs significantly. The originally low-profit film recycling business has successfully entered the high-end supply chain through the upgrade of the two-stage PP PE film pelletizing production line, realizing dual improvement in enterprise profits and market competitiveness.
This real field case fully proves that the professional two-stage PP PE film pelletizing production line is the optimal choice for complex working conditions and high-end mass production. It completely breaks the quality improvement bottleneck of single-stage equipment, helping recycling enterprises get rid of low-price involution and achieve high-quality, high-profit development.

Call to Action
Refer to the same high-end film particle mass production and upgrading solution, and get field quotation, model matching, site planning and working condition commissioning solutions for the two-stage PP PE film pelletizing production line. Free one-on-one consultation is available!
WhatsApp/WeChat: +86 15092868822 | Email: [email protected]
Related reading
- Equipment Implementation Verification: Film Squeeze Material Granulation Production Line Helps Recycling Factories Realize Unmanned Mass Production and Double Capacity
- Practical Verification of Advantages: PVC Hard Trim Recycling Machine Helps Plate Factories Realize Zero-loss Automatic Edge Trim Recycling
- Customer Testimonial: TL-series High-efficiency Ventilation & Filter Plastic Granulator Unit Helps Textile & Plastic Factories Improve Soft Material Quality & Increase Profit