CE marked · ISO 9001:2015 · 18-month warranty

· FAQ

Comprehensive Q&A | Full Answers to Selection, Process and Operation & Maintenance Questions of PP/PE Film & PP Woven Bag Recycling System

The PP/PE Film & PP Woven Bag Recycling System is a special complete set of equipment for the recycling and regeneration of soft plastic wastes such as waste PP/PE films, PP woven bags and ton bags. It integrates shredding, multi-stage cleaning, rinsing, dewatering, squeezing and storage functions. With the core advantages of high automation, low energy consumption, excellent cleaning effect and stable operation, it thoroughly solves the pain points of traditional soft material recycling equipment such as material tangling and blockage, incomplete impurity removal, insufficient dewatering and low production capacity. It is widely used in various plastic solid waste recycling enterprises and soft material deep processing factories. Based on a large number of front-line project practical experience, this article systematically answers high-frequency questions about the PP/PE Film & PP Woven Bag Recycling System including model selection matching, material adaptation, process differences, finished product quality and daily operation and maintenance, helping enterprises select equipment scientifically, standardize production and realize stable mass production.

PP/PE Film & PP Woven Bag Recycling System
PP/PE Film & PP Woven Bag Recycling System

PP/PE Film & PP Woven Bag Recycling SystemQ1: What are the core advantages of the  compared with traditional single machines?

Professional Answer: The core advantages are reflected in three aspects: automation, refinement and energy-saving stable production. Traditional single machines have scattered processes, high manual dependence and single cleaning levels, unable to treat oil stains and interlayer sediment, and prone to material tangling blockage, insufficient dewatering and unstable production capacity. In contrast, the PP/PE Film & PP Woven Bag Recycling System is an integrated complete production line, with front-end pre-shredding to disperse materials, multi-stage layered cleaning for all-round impurity removal, dual dewatering to ensure material dryness, full automatic linkage operation, compact layout, lower energy consumption and higher production capacity. The cleanliness and stability of finished products are far better than traditional equipment, adapting to large-scale and standardized mass production.

Q2: What waste plastic materials does the system adapt to? Can mixed materials be processed normally?

Professional Answer: The equipment is specially adapted to soft plastic materials, mainly processing various PE agricultural greenhouse films, industrial packaging films, stretch films, as well as PP logistics woven bags, grain woven bags, ton bags and other wastes. It can normally process complex soft materials with sediment, dust, slight oil stains and straw impurities, with strong material adaptability. Materials can be directly put into production without fine manual sorting, with high material utilization rate and low production loss. It is not recommended to mix hard materials such as hard plastics, glass and metals to avoid equipment damage.

Q3: How to accurately select equipment capacity specifications according to factory output?

Professional Answer: Match the capacity according to the daily waste processing volume: 500kg/h and 800kg/h specifications with low investment and high cost performance are suitable for small start-up factories and small-batch trial production; 1000kg/h standard capacity is preferred for small and medium-sized stable mass production factories; 1500kg/h medium and high capacity for medium and large deep processing enterprises with sufficient raw material reserves; 2000kg/h top high-yield specification for large-scale solid waste recycling enterprises with non-stop all-weather production to meet large-scale production needs.

Q4: Is the daily operation and maintenance difficult? Is the failure rate high?

Professional Answer: Simple operation and maintenance with extremely low failure rate. The complete equipment has a simple and reasonable structural design, and core components are made of wear-resistant and durable materials, adapting to long-term soft material processing conditions, not easy to wear and material blockage. It adopts full intelligent automatic control with a simple operation interface, which can be operated by ordinary workers after simple training. Daily maintenance only requires regular cleaning of filtered impurities and inspection of component operation status, without complex maintenance, with extremely low operation cost, supporting long-term 24-hour stable continuous operation.

PP/PE Film & PP Woven Bag Recycling System
PP/PE Film & PP Woven Bag Recycling System

Q5: What production scenarios can the cleaned and dewatered finished materials be directly used for?

Professional Answer: Materials processed by the PP/PE Film & PP Woven Bag Recycling System have high cleanliness, qualified dryness, no impurities and no oil stains. They can be directly used for deep processing scenarios such as plastic granulation, plastic modification, plastic product extrusion and packaging auxiliary material production. The finished products have stable quality, can serve mid-to-high-end downstream markets, and have sufficient product premium space.

Call to Action

If you have personalized questions about model selection matching, process customization, production line layout, capacity expansion and accurate quotation of the PP/PE Film & PP Woven Bag Recycling System, feel free to contact us for free one-on-one professional technical consultation!

WhatsApp/WeChat: +86 15092868822 | Email: [email protected]

 

Related reading

العربيةAR