CE marked · ISO 9001:2015 · 18-month warranty

· products

 Upgraded Standard Fully Automatic Mineral Water Bottle Crushing and Washing Line, High-Efficiency PET Bottle Label Removing, Crushing, Rinsing and Purification Production Line

mineral water bottle crushing and washing line

The upgraded standard mineral water bottle crushing and washing line is a customized integrated complete equipment for recycling and purifying waste PET mineral water bottles and beverage bottles. This full-set mineral water bottle crushing and washing line integrates full-process procedures including manual sorting, automatic feeding, powerful label removal, heavy-duty crushing, spiral feeding, two-stage rinsing, double friction cleaning, gradient spin-drying, and air separation impurity removal. It can process waste mineral water bottles mixed with labels, sediment, oil stains and impurities into high-purity PET bottle flakes.

mineral water bottle crushing and washing line
mineral water bottle crushing and washing line

As a standardized production line with strong universality, high stability and excellent purification effect in the PET plastic recycling industry, it is widely suitable for mass production needs of small, medium and large-scale renewable processing plants. Waste mineral water bottle raw materials are usually mixed with plastic labels, glue residues, dust, sediment and oil stains. Traditional simple cleaning equipment suffers from incomplete label removal, uneven crushing, insufficient rinsing, high moisture content of bottle flakes and residual impurities, resulting in low-purity finished flakes and low sales prices.

In contrast, this mineral water bottle crushing and washing line features solid hardware configuration and progressive working procedures. Each device is specially designed to solve core pain points of PET bottle recycling. The full automatic assembly line operation greatly improves the cleanliness and appearance of PET bottle flakes, helping customers increase product premium and production profits.

  1. Complete Equipment Detailed Parameters, Accessory Functions and Core Values

10-meter Sorting Platform: This platform is 10 meters long and 1000mm wide, equipped with wear-resistant rubber belts, thickened racks and RV reducers, matched with a 4kw driving motor. As the first manual sorting station of the production line, the widened and lengthened table allows multiple workers to operate simultaneously. It can quickly eliminate severely flattened, deteriorated and mixed foreign-material bottles, control raw material purity from the source, prevent inferior materials from entering subsequent equipment, and reduce equipment load and invalid loss.

6-meter Conveyor Feeder: With a total length of 6 meters and a width of 800mm, it adopts a rubber belt conveying structure and thickened load-bearing rack, fitted with an RV reducer and a 2.2kw power motor. The equipment runs stably with uniform feeding speed. It automatically transports sorted pure mineral water bottles to the label removing machine, replacing manual feeding. The feeding process is uniform without jamming or material accumulation, ensuring a stable feeding rhythm for the whole line.

4.5-meter Label Removing Machine: The machine body is 4.5 meters long with a roller diameter of 630mm, equipped with emery alloy cutter heads, a 15kw main motor and dual 3kw fan label suction motors. As the core label removing equipment, the wear-resistant alloy cutter heads deliver uniform label stripping force to quickly peel off outer PVC labels of mineral water bottles. The dual-fan negative pressure impurity absorption design automatically collects stripped label fragments, avoiding secondary mixing of label paper scraps into materials. It completely solves the industry problems of incomplete label removal and residual paper scraps of traditional label removers, greatly improving label removal purity.

Secondary 10-meter Sorting Platform: Measuring 10 meters long and 1000mm wide, it is equipped with rubber belts, thickened racks, RV reducers and a 4kw power motor. It serves as a secondary manual re-inspection and sorting station after label removal, used to check and remove residual labels, incompletely stripped bottles and special-shaped impurities. Double sorting control maximizes the purity of materials entering the crushing process, laying a solid foundation for high-precision cleaning and purification in subsequent procedures.

1200-type High-Pressure Crusher: A special crushing device for PET bottles, equipped with wear-resistant lining plates and a 600mm rotating diameter, matched with a 600mm counterweight pulley. The tool set includes 6 rotating knives and 4 fixed knives, adopting a hydraulic upper shell opening design, equipped with a 45kw main motor and a 1.5kw auxiliary motor. Featuring a heavy-duty 25mm thick steel plate body, it is firm, shock-resistant and high-load bearing. The high-pressure crushing structure supports efficient crushing of whole bottles and flattened bottles with uniform flake output. The hydraulic opening design facilitates later screen cleaning and tool replacement with convenient maintenance, thoroughly solving the problems of material jamming and uneven discharging in PET bottle crushing.

Spiral Cleaning Feeder: It has a spiral diameter of 273mm with thickened wear-resistant spiral blades and a 5.5kw driving motor. It undertakes the conveying and primary water washing of crushed bottle flake materials. The thickened blades are wear-resistant, durable and not easy to deform. It synchronously stirs and cleans materials during conveying to remove floating dust and fine impurities, and stably sends materials to the rinsing tank to realize integrated feeding and primary cleaning.

Primary 6-meter Rinsing Tank: With specifications of 6 meters in length, 1.2 meters in depth and 1.2 meters in width, it is made of 6mm thick steel plates, matched with multiple sets of motors of 3kw, 3kw, 1.5kw and 0.75kw. Utilizing the specific gravity difference between PET bottle flakes and impurities, it realizes water circulation flotation, effectively separating floating paper scraps, residual labels and light impurities as well as sinking sediment and heavy impurities. It preliminarily purifies bottle flakes and removes most visible contaminants.

Primary Friction Machine: It has a diameter of 325mm and a body length of 4 meters, equipped with wear-resistant stirring blades and a 18.5kw power motor. High-speed mechanical friction water washing strongly peels off residual glue, oil stains, fine dust and aging stains on the surface of bottle flakes, solving the difficult cleaning problem of adhesive glue and oil stains caused by long-term stacking of mineral water bottles and realizing deep decontamination of materials.

Primary Spin Dryer: With a body length of 2 meters and a diameter of 600mm, it features a 6mm thick plate body and stainless steel screen, with a 18.5kw power motor. High-speed centrifugal dehydration quickly removes most moisture on the surface of bottle flakes, reduces material water content, avoids mildew caused by wet material accumulation, and removes part of adsorbed fine impurities to improve material cleanliness.

Secondary 6-meter Rinsing Tank: Consistent with the parameters of the primary rinsing tank, it is 6 meters long, 1.2 meters deep and 1.2 meters wide, made of 6mm thick plates and supported by multiple sets of power motors for coordinated operation. Secondary water circulation fine flotation further removes fine impurities, broken paper scraps and light residues left after primary cleaning, achieving layer-by-layer purification to ensure bottle flake purity meets standards.

Secondary Friction Machine: It has a diameter of 325mm, a length of 4 meters, wear-resistant blade configuration and 18.5kw power. Secondary high-speed friction fine cleaning completely removes stubborn glue residues and deep oil stains, making bottle flakes transparent and clean to meet the cleaning standards of high-end recycled PET raw materials.

Secondary Spin Dryer: 2 meters long and 600mm in diameter, with a 6mm plate body and stainless steel screen, upgraded with a 22kw high-power motor. It delivers high-strength centrifugal dehydration with better drying effect than the primary spin dryer, minimizing the water content of bottle flakes to achieve higher dryness and meet the standards of subsequent warehousing and deep processing.

Air Separator: With a diameter of 1200mm and a length of 4.5 meters and 7.5kw power, it performs final dry impurity removal, accurately screening residual fine label filaments, dust and light impurities. The dual wet and dry purification process ensures finished bottle flakes are impurity-free, dust-free and scrap-free.

National Standard Distribution Box: Adopting national standard electrical components, it centrally controls all equipment of the entire production line. With neat circuit layout and perfect safety protection, it supports one-key start-stop and linkage operation, complete with overload and leakage protection functions. The equipment runs stably with ultra-low failure rate.

  1. Core Product Features

Dual-layer Sorting and Double Impurity Removal: The mineral water bottle crushing and washing line is equipped with front and rear dual sorting platforms, matched with two-stage rinsing, two-stage friction cleaning and air separation fine impurity removal. It boasts a high impurity removal rate and completely solves the residual problems of PET bottle labels, glue, oil stains and sediment.

Durable and Stable Heavy-Duty Crushing: The 1200-type high-pressure crusher adopts a 25mm thickened body, alloy cutters and hydraulic opening structure, delivering uniform crushing effect, no material jamming and convenient maintenance, suitable for long-term full-load mass production.

In-depth Purification with Wet and Dry Combination: It adopts a multi-process superposition of water washing flotation decontamination, friction glue removal and air separation dry impurity removal. The finished bottle flake cleanliness is far higher than that of ordinary simple production lines.

High Automation Level: The entire assembly line operates in linkage mode with automatic feeding, automatic label removal, automatic material conveying and automatic dehydration. Only a small number of workers are required for auxiliary sorting, greatly saving labor costs.

High Finished Product Quality: Two-stage gradient spin-drying ensures material dryness, and air separation fine purification produces transparent, clean, impurity-free and low-moisture PET bottle flakes with high market premium and wide sales channels.

  1. Equipment Working Process

Waste mineral water bottles are manually placed on the 10-meter primary sorting platform to remove defective and mixed bottles → automatic feeding via 2.2kw 6-meter conveyor → label stripping and negative pressure paper scrap absorption by 4.5-meter dual-fan label removing machine → material re-inspection and impurity removal on the secondary 10-meter sorting platform → pure bottle materials are evenly crushed into standard flakes by 1200-type high-pressure crusher → primary cleaning and feeding by 5.5kw spiral cleaning feeder → impurity flotation by primary 6-meter rinsing tank → deep glue and stain removal by 18.5kw primary friction machine → preliminary dehydration by 18.5kw primary spin dryer → fine purification by secondary 6-meter rinsing tank → deep cleaning and purification by 18.5kw secondary friction machine → high-strength drying by 22kw secondary spin dryer → final dust and impurity removal by 7.5kw air separator → full-process intelligent control via national standard distribution box, outputting high-purity and dry finished PET bottle flakes.

  1. Application Fields

The mineral water bottle crushing and washing line is mainly applied to PET plastic recycling plants, solid waste environmental protection recycling enterprises and beverage bottle resource regeneration companies, specially processing various waste mineral water bottles, pure water beverage bottles and transparent PET beverage bottles. The high-purity PET bottle flakes produced can be used to manufacture chemical fiber polyester, plastic strapping, new PET bottles and plastic products, serving as the core special equipment for PET plastic recycling and regeneration.

  1. FAQ

Q1: Can the equipment completely remove glue and label residues on mineral water bottles?

A: Yes, it can achieve thorough removal. This mineral water bottle crushing and washing line adopts a combined process of emery alloy cutter head label removing machine, two-stage high-speed friction machine, two-stage rinsing and air separation impurity removal. It completely strips labels first, removes adhesive glue through mechanical friction, and finally conducts fine flotation purification, thoroughly eliminating residual label paper scraps and glue stains.

Q2: What is the automation level of the entire production line, and how many workers are required for operation?

A: The whole line operates with automatic linkage. Only 2-3 workers are needed to assist in sorting impurities on the sorting platform. All other procedures including feeding, label removal, crushing, cleaning, dehydration and impurity removal are fully automatic, with extremely low labor costs, perfectly suitable for large-scale mass production.

mineral water bottle crushing and washing line
mineral water bottle crushing and washing line

Call to Action

If you need the site layout drawing, accurate capacity parameters, power consumption details and landing quotation of the mineral water bottle crushing and washing line, welcome to free one-on-one professional technical consultation!

WhatsApp/WeChat: +86 15092868822 | Email: [email protected]

 

Related reading

العربيةAR