The universal HDPE PP Plastic Flake Scrap Recycling Granulation Line is a complete set of fixed-feeding granulation equipment specially developed by TL Series for hard plastic scraps and waste plastic flakes. Targeting the industry pain points of uneven feeding, unstable plasticization and fluctuating output in the granulation of hard HDPE and PP flakes as well as crushed pipe materials, this professional flake scrap recycling granulation line is perfectly adapted to mass production scenarios of hard plastic recycling.

In the plastic recycling industry, soft film granulation equipment cannot meet the processing requirements of hard plastic flakes, crushed pipes and block plastics. Ordinary general granulators are prone to feeding jamming, excessive screw load, incomplete plasticization and inconsistent finished particle quality when processing hard scraps with uneven particle sizes and high hardness, which seriously affects production efficiency and product quality. In contrast, the TL Series HDPE PP Plastic Flake Scrap Recycling Granulation Line is equipped with an exclusive fixed feeding system, which can precisely control the feeding speed and volume of hard materials. Matched with a customized screw plasticization structure, it perfectly adapts to the granulation processing of various hard plastic scraps and serves as professional mass production equipment in the field of hard plastic recycling.
The equipment supports a wide range of plastic materials, capable of stably processing mainstream plastic types such as HDPE, PP, ABS and PS. It is also compatible with PE squeezed materials, waste HDPE flakes, PS foam materials and crushed pipe scraps, realizing multi-purpose operation with strong adaptability.
The complete HDPE PP Plastic Flake Scrap Recycling Granulation Line adopts a modular integrated structure, realizing fully automatic operation from material conveying, fixed feeding, melting plasticization, impurity filtration to pelletizing and air drying. All core accessories are uniquely optimized according to the physical characteristics of hard scraps and plastic flakes, operating cooperatively to ensure stable production, quality improvement and cost reduction. The core functions and practical values of each component are as follows:
Core Equipment Components & Functions
- Variable Frequency Conveying Feeder: Adopts a thickened wear-resistant frame and anti-slip conveying structure with strong bearing capacity for high-density hard flakes and crushed pipe materials. Equipped with a variable frequency speed regulation motor, it automatically adjusts the conveying speed according to the real-time load of the main unit, avoiding overload and jamming caused by centralized inflow of massive hard materials. It realizes uniform, stable and continuous feeding, laying a solid foundation for subsequent fixed-quantity feeding.
- Forced Fixed Feeder:As the core differentiated configuration of this series, it is professionally designed for hard scraps, different from ordinary free feeding structures. It accurately controls the feeding volume and rhythm, completely solving the problems of fluctuating feeding speed, unstable output and inconsistent plasticization caused by uneven size and high density of plastic flakes and scraps. It ensures constant material input per unit time, greatly improving granulation stability and finished product consistency, acting as the key component for stable mass production.
- High-Torque Single-Screw Extruder Main Unit: Adapted to the melting characteristics of hard plastics, it is equipped with a high-torque wear-resistant screw with an optimized groove structure, providing strong thrust and sufficient plasticization stroke to melt hard scraps and flakes of HDPE, PP, ABS and PS quickly and evenly. Matched with an independent multi-zone constant temperature heating system, it precisely controls the melting temperature of different materials, eliminating local overheating scorching and incomplete plasticization, and supporting flexible switching production of various materials.
- High-Precision Vacuum Degassing Device: Cleaned and crushed hard flakes usually contain trace residual moisture, cleaning agent volatile impurities and gas. This device adopts negative pressure vacuum technology to completely extract internal water vapor and miscellaneous gas from molten materials, effectively solving particle defects such as bubbling, hollowing, brittleness and poor transparency, and significantly improving the density and quality stability of recycled particles.
- Fully Automatic Hydraulic Screen Changer Filter: Equipped with multi-layer high-density precision filter screens, it efficiently intercepts sediment, dust, aging colloid and fine impurities mixed in flake materials with high filtration accuracy and thorough impurity removal. It supports non-stop automatic screen replacement without manual disassembly and assembly, effectively improving the effective production capacity, protecting the core screw and die head, extending equipment service life and reducing operation and maintenance costs.
- Horizontal Water Ring Pelletizing System: Adopts special high-hardness and wear-resistant cutting blades for hard materials, suitable for pelletizing high-density hard plastic melts. Variable frequency speed regulation precisely adjusts particle size and length, producing uniform and full particles without connected materials or debris. The water cooling rapid shaping process avoids adhesion and deformation of high-temperature particles, ensuring consistent finished product appearance.
- Centrifugal Dewatering & Air Drying Integrated Machine: Targeting the characteristics of low water absorption and easy residual moisture of hard particles, it separates surface moisture through high-speed centrifugal force, combined with a strong air drying system to quickly dry particles. The finished particles are dry and clean, which can be directly bagged and stored or connected to deep processing procedures without secondary sun drying.
- Intelligent Centralized Electric Control System: Supports one-click linkage start and stop for the whole line, integrating overload protection, blockage early warning, automatic temperature control, fault self-inspection and intelligent fixed feeding regulation functions. It automatically matches the operating rhythm of each process with a simple and intuitive operation interface. The high intelligent level greatly lowers the operation threshold; new workers can operate independently after simple training without long-term professional technical duty, reducing labor costs significantly.
Core Product Advantages
- Precise & Controllable Fixed Feeding: The exclusive forced feeding structure completely solves the problem of unstable feeding of hard plastic flakes, ensuring extremely stable mass production.
- Wide Compatibility with Multiple Materials: Processes various hard scraps, plastic flakes, squeezed materials and foam materials including HDPE, PP, ABS and PS, realizing multi-category production with one machine.
- High-Torque Efficient Plasticization: Fully adapts to the melting demand of hard materials with uniform and thorough plasticization, no raw materials or scorched materials.
- Fully Automatic Closed-Loop Production: Equipped with non-stop screen changing, automatic temperature control and intelligent speed regulation, achieving extremely low labor costs.
- Excellent Finished Product Quality: Vacuum degassing and precise filtration produce pure, bubble-free and high-grade particles with superior appearance.
- Wear Resistance & Low Maintenance: Core components are optimized for hard materials with wear resistance and impact resistance, low failure rate and support for long-term continuous mass production.
Standard Working Process
Cleaned and dried HDPE, PP and other plastic flakes & scraps are uniformly fed via conveyor belt → Fixed-quantity forced feeder precisely controls feeding volume to ensure stable feeding → Materials enter high-torque extruder for constant-temperature melting and plasticization → Vacuum degassing removes water vapor and impurity gas → Hydraulic non-stop screen changing filters fine impurities → Molten materials are evenly extruded through die head → Water ring pelletizing for rapid cooling and shaping → Centrifugal dewatering and air drying for particle drying → High-quality uniform recycled plastic particles are produced.
Application Fields
The HDPE PP Plastic Flake Scrap Recycling Granulation Line is widely applied in hard plastic recycling factories, plastic solid waste treatment enterprises, pipe waste recycling bases and plastic product supporting factories. It mainly processes waste HDPE, PP, ABS, PS plastic flakes, crushed pipe scraps, hard plastic offcuts, PE squeezed materials and PS foam materials. The produced recycled particles can be directly used in multiple deep processing fields such as injection molding products, pipe extrusion, plastic accessory manufacturing and plastic filling auxiliary materials.
FAQ
Q1: Can the line process mixed hard plastics of multiple materials simultaneously?
A: Yes. The HDPE PP Plastic Flake Scrap Recycling Granulation Line is compatible with mainstream hard plastic materials including HDPE, PP, ABS and PS. It supports both refined production of single materials and processing of lightly mixed flakes and scraps. Equipment parameters can be flexibly adjusted to adapt to switching production of multiple materials with strong practicality.
Q2: What are the core advantages of fixed-feeding equipment compared with ordinary granulators?
A: Ordinary granulators lack fixed feeding structures, leading to unstable feeding of hard flakes and scraps, fluctuating output, uneven plasticization and frequent host jamming. The fixed-feeding HDPE PP Plastic Flake Scrap Recycling Granulation Line precisely controls feeding volume and constant feeding rhythm, achieving more uniform plasticization, stable output, lower equipment failure rate and higher finished product consistency, making it more suitable for large-scale mass production.
Q3: Can slightly wet and incompletely dried flakes be directly put into production?
A: Yes. Equipped with an efficient vacuum degassing system, the HDPE PP Plastic Flake Scrap Recycling Granulation Line can effectively remove residual moisture and volatile impurities from materials. Conventional slightly wet materials can be directly processed without secondary drying without affecting finished product quality. For high-humidity materials, matching pre-dewatering equipment can further improve production efficiency and particle purity.

Call to Action
If you need accurate model selection, real-time output quotation, material adaptation solutions and site layout planning for the HDPE PP Plastic Flake Scrap Recycling Granulation Line, feel free to contact us for free one-on-one professional technical consultation!
WhatsApp/WeChat: +86 15092868822 | Email: [email protected]