Most small and medium-sized plastic recycling processing plants adopt low-end simple crushing and granulating production lines for initial production, which can only meet basic production in the short term. With increasing order volume and diversified and complex raw materials, the shortcomings of old equipment are fully exposed: frequent jams and shutdowns when crushing hard plastics, low-priced pellets due to incomplete washing and impurity inclusion, high defective rates caused by uneven heating, and high labor costs. These problems not only restrict capacity improvement but also cause order delays and customer returns, seriously limiting factory development. This customer case shares the practical effects of quality improvement, cost reduction and profit increase after a licensed plastic recycling plant in Jiangsu upgraded to a complete set of heavy-duty high-configuration crushing and granulating production line.

The customer’s factory mainly engages in the recycling and pelletizing of waste PE pipes, PP films and industrial mixed plastic materials with complete recycling, processing and sales qualifications. Before renovation, the factory used traditional simple granulation lines with thin equipment boxes, ordinary screws and simple washing procedures, leading to four core pain points. First, the crusher was prone to jamming and fast bearing wear when processing sediment-containing recycled materials, requiring weekly shutdown maintenance. Second, incomplete raw material washing led to impure and uneven pellets that could only be sold at low prices. Third, traditional heating rings had poor temperature control, causing poor plastic plasticization, frequent pellet black spots and bubbles with a defective rate as high as 8%. Fourth, low automation required 4-5 on-duty workers for the entire line, resulting in extremely high labor and operation costs and thin factory profits.
To solve production bottlenecks, improve product competitiveness and adapt to large-scale mass production, the customer finally selected our complete set of heavy-duty high-configuration crushing and granulating production line after multiple comparisons, completely eliminating old simple equipment and realizing all-round production line upgrading. This upgrade adopts a closed-loop integrated process of heavy-duty crushing, multi-stage friction washing, automatic material scooping and dewatering, intelligent material storage and feeding, two-stage constant-temperature extrusion granulation, and screening dedusting, specifically solving all production pain points of the old line with remarkable post-operation effects.
In the crushing section, the heavy-duty crusher with a 50mm thickened box, heavy-duty bearings and enlarged counterweight wheels completely solves the previous problems of jamming and deformation when crushing thick-wall pipes and hard mixed materials. The equipment supports 24-hour continuous heavy-load operation, increasing the effective startup rate from 70% to over 95%, greatly improving daily raw material processing capacity and reaching full production capacity. The high-power motor ensures uniform crushing and consistent raw material fineness, providing a stable raw material foundation for subsequent washing and granulation.
The upgrade of the washing and purification section is the core key to profit growth in this renovation. The new combination of dual high-speed friction machines, double-layer circulating water washing tanks and automatic wheel-type material scooping machines can thoroughly strip sediment, oil stains and aging impurities on waste plastic surfaces, greatly improving raw material cleanliness. Compared with the simple water washing process of old equipment, raw materials produced by the new line have no residual impurities and lower moisture content, fundamentally eliminating black spots and impurity inclusion in finished pellets and achieving a qualitative leap in pellet appearance.
In the granulation and extrusion section, the combination of 38CrMoAI nitrided wear-resistant screw and barrel and electromagnetic intelligent constant-temperature heating system completely solves the problems of uneven plasticization, high energy consumption and fast accessory wear of traditional equipment. The two-stage granulation main unit runs stably with sufficient extrusion pressure for uniform and stable plastic plasticization. Precise electromagnetic zoned temperature control eliminates local high-temperature burning and low-temperature insufficient plasticization. The finished pellets are uniform in size, transparent in color and free of bubble defects, fully meeting high-end modified recycled pellet standards, with a sales price increase of more than 200 yuan per ton compared with before.
Automation upgrade greatly reduces labor costs. The entire crushing and granulating production line realizes intelligent linked operation with automatic feeding, automatic material control, automatic material scooping and automatic screening and discharging, requiring only 1-2 workers for full-line duty, saving tens of thousands of yuan in annual labor costs. Meanwhile, high-end wear-resistant accessories greatly reduce maintenance frequency and accessory replacement costs, and the electromagnetic energy-saving system continuously reduces production energy consumption, significantly cutting comprehensive production costs.
The customer’s production supervisor feedbacks that after upgrading this crushing and granulating production line, the factory completely gets rid of the predicament of frequent maintenance shutdowns, excessive defective pellets and low-margin sales. With stable production capacity and consistent finished product quality, the factory not only achieves a high repeat purchase rate of old customers but also successfully obtains multiple high-end modified plastic procurement orders, significantly improving overall profitability with rapid equipment investment return. The factory will gradually expand the scale of waste plastic recycling and processing relying on the stable existing production line.
This crushing and granulating production line is suitable for upgrading and renovation of most small and medium-sized plastic recycling plants and new factory commissioning. It can realize stable mass production and high-quality output whether processing clean film raw materials or complex impure waste hard materials, serving as the core equipment for quality improvement, cost reduction and profit growth in the recycled plastic industry.

Call to Action
Want to obtain the same customizedcrushing and granulating production line solution, learn the commissioning effect suitable for your raw materials, and freely consult equipment quotes and upgrade solutions!
WhatsApp/WeChat: +86 15092868822 | Email: [email protected]
Related reading
- Equipment Implementation Verification: Film Squeeze Material Granulation Production Line Helps Recycling Factories Realize Unmanned Mass Production and Double Capacity
- Practical Verification of Advantages: PVC Hard Trim Recycling Machine Helps Plate Factories Realize Zero-loss Automatic Edge Trim Recycling
- Customer Testimonial: TL-series High-efficiency Ventilation & Filter Plastic Granulator Unit Helps Textile & Plastic Factories Improve Soft Material Quality & Increase Profit