CE marked · ISO 9001:2015 · 18-month warranty

· news

How High-Configuration Crushing and Granulating Production Lines Solve Low Efficiency, High Consumption and Poor Pellet Problems in Plastic Recycling Plants

At present, most small and medium-sized plastic recycling processing factories in China still use low-end simple crushing and granulating production lines, facing four core long-term pain points. First, thin crusher boxes and small bearings easily cause jamming, deformation and damage when crushing hard plastics, leading to frequent shutdown maintenance. Second, simple washing procedures fail to completely remove sediment and oil stains, resulting in impure and poor-looking recycled pellets that cannot be sold at high prices. Third, traditional heating methods cause uneven temperature and poor plastic plasticization, easily producing pellets with black spots, bubbles and defects. Fourth, low automation requires extensive manual transfer with high energy consumption and unstable capacity, continuously squeezing profit margins. To break through industry bottlenecks, the core solution is to upgrade to a structurally robust, high-configured, technologically complete and mature automatic crushing and granulating production line.

crushing and granulating production line
crushing and granulating production line

Most ordinary granulation equipment adopts thin iron sheet boxes, ordinary carbon steel screws and simple heating rings, which can only process clean and light plastic raw materials. When dealing with waste pipes, hard plastics and mixed recycled materials with sediment and oil stains, they will suffer from sharply reduced crushing efficiency, rapid accessory wear and soaring pellet defective rates. Our newly upgraded heavy-duty high-configuration crushing and granulating production line is specially optimized for common industry pain points. Every procedure from crushing, washing and dewatering to material storage, extrusion granulation and screening discharging is strengthened and optimized, perfectly adapting to the recycling processing needs of complex waste plastics and becoming the preferred core equipment for plastic recycling factories to improve quality and reduce costs.

In the crushing section, the equipment is equipped with a heavy-duty crusher with a 50mm thickened box, matched with a 1000mm enlarged counterweight pulley and 22238 heavy-duty bearings. Its impact resistance and wear resistance are several times higher than ordinary models, easily processing difficult-to-process raw materials such as thick-wall PE pipes, hard PP plastics and waste mixed materials, completely eliminating machine jamming, stalling and body deformation, and greatly improving the effective startup rate of the equipment. The high-power motor ensures stable crushing efficiency and uniform discharged particles, laying a solid foundation for subsequent washing and granulation.

Washing and purification is the key link determining the appearance and selling price of recycled pellets, and also the main shortcoming of most low-end crushing and granulating production lines. This equipment adopts the combined process of dual high-speed friction machines, multi-stage circulating water washing and automatic material scooping. Thickened wear-resistant friction teeth and stainless steel screen mesh strip stubborn oil stains, sediment and aging layers on plastic surfaces through high-speed friction, and double-layer circulating water tanks filter and purify materials to greatly improve raw material cleanliness. Matched with wheel-type automatic material scooping equipment for automatic dewatering and material collection, it reduces manual intervention and raw material moisture content, avoiding bubbling and strip breaking in subsequent granulation.

The stability of the granulation and extrusion section directly determines the production capacity and finished product quality of the entire line. The core screws, barrels and die heads of this production line are made of high-end 38CrMoAI alloy steel with professional nitriding treatment, featuring high hardness, high temperature resistance and corrosion resistance. The feeding port is embedded with wear-resistant alloy, resisting wear and deformation under long-term heavy-load production. The two-stage granulation main unit is matched with a hard-tooth low-noise reducer, running stably with low noise and high torque, providing sufficient extrusion pressure for uniform plastic plasticization. Meanwhile, the intelligent temperature control system combining electromagnetic heating and zoned heating rings heats up faster and maintains more uniform temperature than traditional methods with greatly reduced energy consumption, effectively solving common problems such as pellet black spots, uneven plasticization and frequent strip breaking.

Automation upgrade is one of the core highlights of this crushing and granulating production line. The PLC intelligent material storage control system, automatic feeding, automatic material scooping and linked start-stop design realize full-process unmanned transfer operations. Only 1-2 workers are required to operate the entire line, greatly saving labor costs. The integrated configuration of rear-end cooling, vibration blowing dedusting, precise pelletizing and vibration screening automatically screens defective pellets, ensuring uniform size and consistent appearance of finished pellets and greatly enhancing product market competitiveness.

In terms of long-term operation costs, high-end wear-resistant accessories greatly reduce equipment maintenance and replacement costs, the energy-saving heating system continuously reduces production energy consumption, stable mass production improves overall capacity, and high-quality pellets realize product premium. The superposition of multiple advantages helps factories quickly recover equipment investment and improve long-term profitability. Whether for new plastic recycling factories or old production line upgrading and renovation, this crushing and granulating production line perfectly adapts to various PP and PE waste plastic recycling scenarios.

FAQ

Q1: What plastic raw materials can this process?

A: The equipment has strong adaptability, widely processing various common waste plastics such as waste PE pipes, PP films, plastic bottle flakes, industrial hard plastics, plastic scraps and recycled mixed materials, suitable for most small and medium-sized plastic recycling processing scenarios.

Q2: Is the equipment high in energy consumption? Is daily operation and maintenance difficult?

A: Equipped with an electromagnetic energy-saving heating system with precise zoned temperature control, the equipment reduces energy consumption by more than 20% compared with traditional equipment. Core accessories are wear-resistant and durable with an extremely low failure rate. Matched with a national standard electric control system for stable operation, it only requires simple cleaning and maintenance daily with extremely low operation difficulty.

crushing and granulating production line
crushing and granulating production line

Call to Action

If you need to know the detailed capacity, power consumption parameters and customized renovation solutions of the crushing and granulating production line, or obtain free industry adaptation suggestions, feel free to consult us anytime!

WhatsApp/WeChat: +86 15092868822 | Email: [email protected]

 

 

Related reading

العربيةAR