In the production process of plastic sheets and hard plates, continuously generated hard trims on both sides are the main source of raw material loss for enterprises. Most factories rely on manual recycling for a long time, which not only causes high labor costs and serious material loss, but also easily affects the stable operation of production lines due to trim accumulation. A highly adaptable, stable and energy-saving hard trim recycling machine is the key equipment for plate factories to achieve cost reduction, efficiency improvement and lean production. A professional PVC and ABS decorative plate manufacturer in Foshan, Guangdong, has completely solved the problems of edge trim waste, labor consumption and production instability by upgrading the PVC Hard Trim Recycling Machine, realizing double improvement in production capacity and profits with automatic sheet recycling equipment.
The customer mainly engages in the extrusion production of PVC decorative plates and ABS hard sheets with multiple standardized extrusion production lines, generating a large number of 0.8–2.0M hard trims during daily mass production. Before equipment upgrading, the factory adopted a traditional manual processing mode, arranging two workers to regularly cut, collect and transport edge trims, resulting in persistently high annual labor expenses. Manual recycling has serious delays, and excessive trim accumulation often leads to edge trim entanglement in equipment and main machine shutdown, causing multiple shutdown cleanups every month and seriously delaying mass production progress. Accumulated trims are prone to dust and impurity contamination, resulting in low-purity recycled materials that can only be sold at a discounted price after secondary utilization, greatly reducing raw material value. The factory once tried ordinary crushing equipment to process edge trims, but the ordinary flat cutter structure has insufficient shearing force, causing frequent blockage and stalling when processing hard PVC and ABS trims, as well as excessive motor load, high power consumption and high failure rate, which cannot adapt to synchronous operation of production lines at all.

To completely solve the problems of large edge trim loss, high labor costs and unstable production, the customer inspected multiple industry-specific recycling equipment on-site, focusing on comparing equipment shearing structure, energy consumption performance, automation degree and production line adaptability, and finally selected our high-end PVC Hard Trim Recycling Machine TL-300# for integrated upgrading of multiple extrusion production lines.
After the equipment was put into operation, the customer’s production conditions were fully optimized. The exclusive 2-degree oblique shear large-drop scissor-type structure easily cuts various hard PVC, ABS and PP trims without slipping, blocking or stalling, ensuring smooth and stable crushing process with significant energy-saving effect. Compared with old equipment, the monthly power consumption loss is greatly reduced. The equipment can operate synchronously with the extrusion main unit to automatically pick up and crush generated trims in real time, completely eliminating material accumulation and production line shutdown failures, greatly improving mass production stability.
Supported by the complete wind screening, screw conveying and cyclone collecting system, the sheet recycling machine produces uniform and impurity-free particles that can be directly and automatically conveyed back to the extruder hopper for cyclic utilization, increasing the raw material utilization rate to 100% and completely eliminating edge trim waste and discounted sales. The fully automatic unattended operation directly saves two material collection workers and a large amount of annual labor expenses. The cyclone dust removal and collection structure ensures zero dust emission and no scattered waste in the workshop, making the production environment cleaner and more compliant, fully meeting the factory’s standardized production management requirements.
Six months after commissioning, the customer feedback shows that the production line failure rate is greatly reduced, the effective production time is significantly increased, raw material loss, labor cost and power consumption are reduced simultaneously, and production profits rise steadily. Meanwhile, the stable quality of recycled materials improves the uniformity and appearance of finished plates, further enhancing the market competitiveness of products. This practical case fully proves that the PVC Hard Trim Recycling Machine is a core essential equipment for plastic sheet and plate manufacturers to achieve cost reduction, efficiency improvement and lean production, adapting to automatic recycling working conditions of various hard plastic edge trims.

Call to Action
Want to refer to the same plate production line upgrading solution and obtain accurate model selection, working condition adaptation and quotation of PVC Hard Trim Recycling Machine? Welcome free one-on-one professional technical consultation!
WhatsApp/WeChat: +86 15092868822 | Email: [email protected]
Related reading
- Equipment Implementation Verification: Film Squeeze Material Granulation Production Line Helps Recycling Factories Realize Unmanned Mass Production and Double Capacity
- Customer Testimonial: TL-series High-efficiency Ventilation & Filter Plastic Granulator Unit Helps Textile & Plastic Factories Improve Soft Material Quality & Increase Profit
- Practical Case Verification | PVC Soft & Hard Sheet Multi-Functional Plastic Shredder Helps Building Material Factories Simplify Production Lines and Improve Profitability Efficiently