The new-generation high-efficiency belt crushing and washing line is an integrated recycling and regeneration equipment independently developed for industrial waste packing belts and packaging strapping belts. Integrating two-stage crushing, magnetic iron removal, water circulation rinsing, dewatering drying and intelligent electric control, the complete belt crushing and washing line specially solves major recycling pain points of waste packing belts, including residual iron buckles, sticky dirt, uneven crushing, difficult impurity removal and high moisture content. As the standardized core equipment for resource regeneration of packing belt waste, it fully adapts to mass production operations of small, medium and large plastic recycling plants.

Traditional single crushers can only realize simple material crushing, failing to remove inherent iron buckles, rust and surface stains on packing belts. Materials processed by single standalone machines are featured with numerous impurities, poor appearance and high moisture content, resulting in extremely low regeneration utilization rate. In contrast, this fully automatic belt crushing and washing line adopts a thickened two-stage crushing structure of 650-type + 800-type, matched with permanent magnet iron-plastic separation, circulating water rinsing and professional dewatering and drying technology. It purifies materials layer by layer with full automatic operation and minimal manual intervention. The finished belt fragments are clean, dry and high in purity, which can be directly used for plastic granulation and secondary processing. The equipment delivers far higher cost performance and mass production stability than traditional single machines.
Complete Equipment Parameters, Accessory Functions and Core Values
- 630-type Dewaterer (without motor)
As the core terminal dewatering equipment of the production line, it is professionally designed for crushed and cleaned packing belt materials. The large-volume cavity supports mass material dewatering operations. The equipment is delivered without a motor, allowing customers to select and match motors with corresponding power according to actual capacity needs, realizing flexible adaptation to different production scales. Its core function is to thoroughly remove residual surface moisture from washed wet materials, rapidly dry wet fragments, greatly reduce material moisture content, solve common problems such as mildew, adhesion and unavailability for direct storage and processing of wet materials, and effectively improve finished product quality and storage cycle.
- 530-type Rinsing Tank (3.0KW motor)
Equipped with a dedicated 3.0KW drive motor with stable and sufficient power, it drives high-speed circulating rolling water flow inside the tank. As the core water washing and purification unit of the belt crushing and washing line, the continuous circulating water flow scours packing belt fragments in all directions, thoroughly stripping surface sediment, oil stains, floating dust and fine impurities with no cleaning dead corners. The circulating water design saves water resources and reduces production costs, significantly improving material cleanliness and laying a solid foundation for subsequent deep processing.
- 800-type Crusher (thickened steel plate, 800mm blade length, compatible with 45KW motor, without motor)
Serving as the primary crushing equipment of the production line, the body is integrally welded with thickened steel plates, featuring firm structure, shock resistance, impact resistance and non-deformation, ensuring no cracking under long-term heavy-load operation. Equipped with 800mm extended blades with wide crushing coverage and strong shearing force, it adapts to mass and wide-width packing belt crushing operations. The equipment is standardly compatible with 45KW high-power motors (motor not included) with sufficient power reserve. It can quickly crush whole and bundled waste packing belts, completely eliminating blade winding, uneven crushing and material jamming to guarantee efficient and stable mass production.
- 600-type L-shaped Single Magnetic Separation (Permanent Magnet) Conveyor (1.1KW motor)
The belt crushing and washing line is equipped with a 1.1KW variable-frequency drive motor for stable operation and adjustable conveying speed. As a dedicated iron-plastic separation device, it adopts a reasonably arranged L-shaped structure for smooth feeding. Matched with a high-performance permanent magnet magnetic separation structure, it can accurately adsorb metal impurities such as residual iron buckles, iron filings and rust from crushed packing belts, realizing thorough iron-plastic separation from the source. It completely solves the problem that metal impurities affect finished product quality and wear subsequent equipment, greatly improving material purity and protecting follow-up crushing and cleaning accessories.
- 650-type Crusher (thickened steel plate, 650mm blade length, compatible with 30KW motor, without motor)
It is an auxiliary fine crushing device with a thickened steel plate body, excellent wear resistance and stable structure. Fitted with 650mm precision blades and compatible with 30KW motor power standard (motor not included), it is mainly used for secondary fine crushing. It refines and trims large-particle materials after primary coarse crushing by the 800-type crusher, ensuring uniform and regular discharge particle size, avoiding residual materials with inconsistent sizes and improving the overall quality of finished products.
- 600-type L-shaped Conveyor (1.1KW motor)
Powered by a stable 1.1KW drive motor, it realizes uniform conveying without slipping or jamming. The L-shaped lifting structure accurately connects each process of the belt crushing and washing line, automatically transporting crushed materials to magnetic separation and rinsing units. It achieves full-line automatic feeding, replaces manual handling, greatly saves labor costs and ensures coherent working procedures and stable production rhythm.
- National Standard Distribution Box (no model)
Assembled with full sets of national standard electrical accessories, it features standardized circuit layout, high protection level, safety and durability. As the intelligent control core of the entire production line, it centrally manages the start-stop, operation and speed regulation of all equipment. With simple operation and multiple protection functions including overload, short circuit and leakage protection, it effectively avoids circuit faults, ensures safe and stable equipment operation and reduces potential production safety hazards.
Core Product Features
- Uniform Discharge via Two-stage Crushing: Adopting the combined configuration of 800-type coarse crushing and 650-type fine crushing, the belt crushing and washing lineis equipped with thickened steel plate bodies and extended wear-resistant blades, adapting to all types of waste packing belts. It achieves thorough crushing without residual materials and completely regular particle size.
- Accurate Iron-plastic Separation: The dedicated permanent magnet magnetic separation conveyor efficiently removes iron buckles and iron filings impurities from packing belts, improving material purity from the source and preventing equipment damage caused by metal impurities.
- Integrated Water Washing and Dewatering: The 530-type circulating water system realizes deep decontamination, while the 630-type professional dewaterer completes rapid dewatering. Finished materials are clean and dry without secondary sun drying, ready for direct deep processing.
- Full Automation and Labor Saving: Dual L-shaped conveyors realize automatic feeding and conveying. The full closed-loop assembly line operation requires no on-duty workers, greatly reducing manual operation costs.
- Safe, Durable and Easy Maintenance: The thickened mechanical structure plus national standard electric control system ensures low failure rate and excellent wear resistance. With highly adaptable accessories and simple maintenance, it is suitable for long-term continuous mass production.
Equipment Working Process
Workers sort and feed bundled and scattered waste packing belts → The 600-type L-shaped conveyor automatically feeds materials evenly into the 800-type main crusher for primary coarse crushing → Coarsely crushed materials are transported to the magnetic separation conveyor. Driven by the 1.1KW motor, the permanent magnet structure thoroughly separates metal impurities such as iron buckles and iron filings → Purified materials without iron impurities are sent to the 650-type crusher for secondary fine crushing to trim particle size and unify discharge specifications → Fine crushed materials are delivered to the 530-type rinsing tank. The 3.0KW motor drives circulating water flow for deep cleaning to remove oil stains and sediment impurities → Washed wet materials are sent to the 630-type dewaterer for rapid dewatering and drying → Finally, high-quality clean, dry and impurity-free packing belt fragments are produced. The fully automatic whole-process operation ensures coherent procedures, high production efficiency and stable quality.
Application Fields
The belt crushing and washing line is widely applied in renewable resource recycling plants, packaging material processing factories and industrial waste treatment plants. It professionally recycles and processes PET packing belts, PP packing belts, industrial strapping belts and waste packaging belts. The purified packing belt fragments after processing can be directly used for plastic granulation, secondary production of new packing belts and plastic product filling, realizing cyclic regeneration and value recovery of industrial waste.
FAQ
Q1: Can whole waste packing belts with iron buckles be directly put into the equipment for processing?
A: Yes. Equipped with a dedicated magnetic iron removal unit and two-stage crushing structure, this belt crushing and washing line can directly process waste packing belts with iron buckles and rust. It automatically separates iron and plastic impurities during operation without manual pre-removal of iron buckles, greatly simplifying production procedures and saving labor costs.
Q2: What are the advantages of the two-stage crushing structure compared with single-machine crushing?
A: The advantages are very prominent. Single-machine crushing easily causes uneven particle size, excessive long residual materials and incomplete crushing. In contrast, the two-stage structure of 800-type coarse crushing matched with 650-type fine crushing first breaks large materials and then finely trims particles, delivering higher discharge regularity and a nearly 100% crushing qualification rate. Meanwhile, it avoids overload operation of single equipment, effectively reducing equipment wear and prolonging service life.

Call to Action
If you need adaptive equipment solutions, motor selection suggestions, mass production commissioning processes and accurate quotations for the belt crushing and washing line, welcome to free technical consultation!
WhatsApp/WeChat: +86 15092868822 | Email: [email protected]