CE marked · ISO 9001:2015 · 18-month warranty

· products

Modular Precision Matched Single-stage PP PE Film Granulating Line – Fully Automatic TL Series Single-stage Film Pelletizing Equipment

single-stage PP PE film granulating line

The single-stage PP PE film granulating line is a customized one-piece granulating equipment designed exclusively for the recycling and regeneration of waste PP and PE films. Abandoning the cumbersome procedures of traditional two-stage machines, it integrates compaction, plasticization, filtration, extrusion, and pelletizing into one single process through advanced single-stage integrated technology. Featuring lower energy consumption, simpler operation, and faster return on investment, this single-stage PP PE film granulating line serves as a high-cost-performance mainstream production machine for the soft film recycling industry.

single-stage PP PE film granulating line
single-stage PP PE film granulating line

In the plastic film recycling industry, soft materials such as LDPE, HDPE, PP agricultural films, packaging films, and woven bag films are fluffy in texture with high moisture and dust content. Traditional two-stage granulating lines suffer from large floor occupation, complicated processes, high energy consumption, and heavy labor input, squeezing the profit margins of most small and medium-sized processing factories. In contrast, the TL series single-stage PP PE film granulating line adopts mature single-stage granulating technology, with optimized screw length-diameter ratio, compaction structure and extrusion system tailored to film material characteristics. It completes the entire recycling and granulating process with a single unit without multi-equipment series transmission. The finished pellets are dense, uniform and stable in quality, fully meeting the downstream processing demands of civil injection molding, extrusion, and film reproduction. It is perfectly adaptable to small and medium batch production and large-scale standardized manufacturing scenarios.

Complete Gradient Model Parameters

This series of single-stage PP PE film granulating line covers full-capacity intervals with five gradient models, featuring accurate parameters and flexible selection to adapt to factories of different production scales:

  • TL85: Screw diameter 85mm, length-diameter ratio 33:1, PE capacity 160-220kg/h, PP capacity 120-180kg/h
  • TL100: Screw diameter 100mm, length-diameter ratio 33:1, PE capacity 260-320kg/h, PP capacity 220-280kg/h
  • TL130: Screw diameter 130mm, length-diameter ratio 33:1, PE capacity 450-550kg/h, PP capacity 380-450kg/h
  • TL160: Screw diameter 160mm, length-diameter ratio 30:1, PE capacity 650-800kg/h, PP capacity 550-700kg/h
  • TL180: Screw diameter 180mm, length-diameter ratio 28:1, PE capacity 1000-1200kg/h, PP capacity 800-1000kg/h

All models feature mature structure and stable parameters, which can be fine-tuned according to material humidity and dirt level with strong universality.

Core Accessories, Functions and Values

The entire single-stage PP PE film granulating line adopts a modular precision matching structure. Each accessory is specially optimized for the pain points of PP and PE films: fluffy texture, high water absorption and difficult plasticization. With clear division of labor and efficient linkage, it fully guarantees stable production and high finished product quality.

  1. Variable-frequency Automatic Feeding & Metal Detection Integrated Machine

Equipped with anti-slip wear-resistant belt and thickened frame, matched with a variable-frequency speed regulation system, it automatically adjusts feeding speed according to host load, avoiding machine blockage caused by material accumulation, bridging and overfeeding. The built-in high-precision metal detector intercepts iron wires, nails and other metal impurities in advance, effectively protecting core rear-end accessories such as screws and dies, greatly reducing equipment failure rate and maintenance cost, and realizing unmanned uniform feeding.

  1. High-speed Compaction Granulator

As the core pre-processing accessory of the single-stage line, it solves the industry problem of fluffy, bulky and hard-to-feed film materials fundamentally. Through high-speed cutting and friction extrusion, it quickly breaks up, compacts and preheats loose and lightweight PP/PE films, reduces material volume and increases material density. Meanwhile, it removes most surface moisture by friction waste heat, greatly cutting down drying and extrusion energy consumption and ensuring uniform plasticization and stable discharging in subsequent processes.

  1. Single-screw Extrusion Host (Core Granulating Unit)

Each model is equipped with a exclusive screw with matched length-diameter ratio. Small models adopt 33:1 length-diameter ratio for refined plasticization in small and medium production, while large models adopt 28:1 and 30:1 short ratios to prioritize high-efficiency mass production. Made of high-strength wear-resistant alloy steel, the screw groove structure is optimized for soft films, delivering uniform conveying thrust and wide plasticization range. Matched with a zoned constant temperature heating system, it rapidly melts compacted materials and eliminates uneven plasticization and hollow bubble defects in pellets.

  1. Vacuum Degassing Device

Equipped with a high-precision vacuum degassing module, it thoroughly extracts residual water vapor, volatile oil stains and impurity gas inside film materials. It effectively solves the bubbling problem caused by high moisture content of waste films, purifies molten materials, significantly improves the compactness and transparency of recycled pellets, and avoids defects such as pores, black spots and brittleness in finished pellets.

Single-stage PP PE Film Granulating Line5. Fully Automatic Hydraulic Screen Changer for

It supports non-stop automatic screen changing. Multi-layer precision filter screens efficiently intercept sediment, aging colloid and fine impurities with high filtration accuracy, no material leakage and no jamming. Manual screen changing and production halt are no longer required, effectively improving effective production capacity, protecting screws and dies, extending the service life of core accessories, and ensuring pure and impurity-free finished pellets.

  1. Water Ring Pelletizing & Dehydration Drying System

Adopting horizontal water ring pelletizing technology, the variable-frequency cutter accurately controls pellet size, producing uniform pellets without debris or connected materials. Water cooling realizes rapid shaping, and the special dehydration and drying unit quickly removes surface moisture of pellets. The finished pellets are dry, plump and uniform in appearance, ready for direct bagging, warehousing or deep processing.

  1. Intelligent Centralized Electric Control System

The entire single-stage PP PE film granulating line supports one-click linkage start and stop, equipped with automatic temperature control, overload protection, blockage early warning and fault self-inspection functions, which automatically match the operation rhythm of each process. The operation interface is simple and intuitive, enabling new operators to get started with simple training without professional technicians on duty, greatly lowering operation thresholds and production operation and maintenance costs.

Core Product Features

  1. Single-stage Integrated High Efficiency: The integrated process eliminates intermediate transportation and secondary processing procedures of two-stage equipment, featuring smaller floor space and lower energy consumption.
  2. Complete Gradient Parameters: Five models cover full capacity ranges, adapting to factory investment of all scales.
  3. Strong Soft Material Adaptability: Exclusive compaction and plasticization structure solves the processing difficulties of fluffy and water-rich PP/PE films.
  4. Stable Finished Product Quality: Vacuum degassing and precision filtration produce dense pellets with no bubbles and few impurities.
  5. High Automation: Non-stop screen changing, automatic feeding and intelligent temperature control minimize labor costs.
  6. Outstanding Cost Performance: Low equipment investment and short payback period, ideal for mass production of small and medium-sized recycling enterprises.

    single-stage PP PE film granulating line
    single-stage PP PE film granulating line

Standard Working Process

Waste PP/PE films are automatically fed by the conveyor belt, with metal impurities intercepted by the metal detector → Materials are compacted, broken up and preheated by the high-speed granulator to remove surface moisture → Materials enter the single-screw extrusion host for constant-temperature melting and plasticization → Vacuum degassing removes water vapor and impurity gas → Hydraulic screen changer filters molten impurities → Uniform material strip extrusion through the die head → Water ring pelletizing and shaping → Dehydration and surface drying → High-quality uniform recycled plastic pellets are produced.

Application Fields

The single-stage PP PE film granulating line is widely used in plastic recycling processing plants, agricultural film recycling bases, packaging solid waste treatment enterprises and injection molding supporting processing factories. It mainly processes waste HDPE, LDPE, LLDPE, PP films, packaging films, stretch films, film scraps and soft plastic miscellaneous materials. The produced pellets can be directly used for plastic injection molding, pipe extrusion, film reproduction and plastic filling auxiliary materials.

FAQ

Q1: What are the core advantages compared with two-stage production lines?

A: The core advantages focus on cost reduction and efficiency improvement. The single-stage integrated design features simpler procedures, smaller floor space, lower procurement cost and about 20% lower energy consumption than two-stage equipment. It also requires less labor, simpler maintenance and faster return on investment. It is the first choice for small and medium-sized recycling enterprises with excellent cost performance, fully adapting to conventional mass production of PP and PE films.

Q2: Why do PE and PP capacities differ in the same model? Is mixed material production supported?

A: PP has a higher melting point and greater plasticization difficulty, so the PP capacity of the same model is slightly lower than PE capacity. All parameters are standard field-tested data that fit actual production conditions accurately. The equipment supports mild mixed production of PP and PE without strict material sorting, adapting to miscellaneous material processing scenarios with high flexibility.

Q3: Can damp and oily waste films be directly put into production?

A: Yes. The single-stage PP PE film granulating line is equipped with dual dewatering and impurity removal functions of high-speed compaction preheating and vacuum degassing, which can effectively remove surface moisture, slight oil stains and volatile impurities of films. Conventional damp and dirty materials can be directly processed without complicated pre-treatment. For heavily oily materials, matching pre-cleaning equipment can be equipped to ensure qualified finished product quality.

Call to Action

For accurate model selection, real-time quotation, capacity matching solutions and site layout planning of the single-stage PP PE film granulating line, feel free to contact us for free one-on-one professional technical consultation!

WhatsApp/WeChat: +86 15092868822 | Email: [email protected]

 

Related reading

العربيةAR