Enterprises engaged in packaging, logistics and industrial production generate a huge amount of waste PET and PP packing belts every day. These tough plastic packing belts have high recycling value but difficult processing. A Henan enterprise focusing on industrial packaging waste recycling and processing has long recycled large quantities of waste packing belts with iron buckles, oil stains and sediment. In the early stage, the enterprise adopted an extensive production mode of ordinary single crusher plus simple pool water washing, facing long-term mass production bottlenecks: uneven crushing particle size, excessive long residual materials, incomplete iron impurity removal, mildewed wet materials after washing, poor finished product appearance, low selling price, high labor cost and low production efficiency, resulting in meager profit from waste regeneration. To break through production bottlenecks and improve product quality and capacity, the enterprise fully launched the belt crushing and washing line to realize standardized and high-quality regeneration of waste packing belts.

Shortcomings of the original production line before upgrading: The original single ordinary crusher had a thin body and insufficient blade length, unable to adapt to wide-width packing belt crushing, resulting in frequent blade winding, material jamming and shutdown cleaning with serious capacity loss. Without professional magnetic iron removal equipment, iron buckles and iron filings mixed in materials not only reduced material purity but also wore subsequent granulation equipment. Simple pool soaking could not remove stubborn oil stains and fine sediment with poor cleaning effect. Lacking professional dewatering equipment, washed materials relied on natural sun drying, which was greatly affected by weather with long production cycle and over-standard moisture content. The whole process depended on manual handling, sorting and drying, leading to high labor cost and extremely low production efficiency.
belt crushing and washing line Production effect after upgrading to fully automatic : All production pain points are completely solved. Equipped with 800-type + 650-type thickened two-stage crushing units, the thickened steel plate body is firm and wear-resistant. The matched special blades of different lengths adapt to all specification packing belts. Primary coarse crushing plus secondary fine crushing completely eliminates blade winding, uneven crushing and residual materials, achieving uniform and regular discharge particles and a greatly improved crushing qualification rate. The supporting 600-type L-shaped magnetic separation conveyor feeds materials uniformly and accurately adsorbs all metal impurities to realize thorough iron-plastic separation, improving material purity from the source and avoiding equipment damage and quality defects caused by metal impurities.
The closed-loop water washing and dewatering process fully optimizes finished product quality. The 530-type rinsing tank driven by a 3.0KW motor uses circulating flowing water to dynamically scour materials and thoroughly remove surface oil stains, sediment and floating dust. Wet materials after water washing are automatically sent to the 630-type dewaterer for high-speed drying, no longer relying on manual sun drying and weather restrictions, realizing all-weather mass production with dry, mildew-free and qualified moisture content materials. Two 600-type L-shaped conveyors connect all procedures automatically with stable 1.1KW motor feeding, greatly reducing on-site personnel and cutting labor costs by more than half. The national standard distribution box realizes centralized equipment control with simple operation, safe and stable operation and greatly reduced failure rate.
According to the customer’s production supervisor: After launching the belt crushing and washing line, the production line has achieved all-round upgrades in automation level, production efficiency and finished product quality. The problem of residual material impurities is completely solved. The finished particles are clean, dry and good-looking with a significantly higher market selling price. The equipment operates stably with simple maintenance and low loss, realizing cost recovery in a short time. It truly turns packaging waste into wealth and greatly improves the overall economic benefits of the enterprise.

Call to Action
If you need to refer to the same belt waste regeneration upgrade scheme, obtain the commissioning process and exclusive quotation of the belt crushing and washing line, consult one-to-one for production line adaptation solutions for free!
WhatsApp/WeChat: +86 15092868822 | Email: [email protected]
Related reading
- Equipment Implementation Verification: Film Squeeze Material Granulation Production Line Helps Recycling Factories Realize Unmanned Mass Production and Double Capacity
- Practical Verification of Advantages: PVC Hard Trim Recycling Machine Helps Plate Factories Realize Zero-loss Automatic Edge Trim Recycling
- Customer Testimonial: TL-series High-efficiency Ventilation & Filter Plastic Granulator Unit Helps Textile & Plastic Factories Improve Soft Material Quality & Increase Profit