The core mass production pain points of large-scale industrial plastic recycling bases focus on the difficult processing of bulk thick-walled plastics and bundled waste materials, as well as insufficient pretreatment capacity. Most enterprises previously adopted small and medium-sized Large Plastic Crusher models below 1200 type, which suffer from insufficient power, limited feeding caliber, hard material jamming, capacity lagging behind production line demand and frequent maintenance. These devices require manual cutting preprocessing by multiple workers, resulting in high labor costs and large material loss, seriously restricting large-scale mass production. A large renewable resource base in Shandong mainly recycles industrial waste plastic plates, thick-walled pipes and bundled packaging wastes. To break capacity bottlenecks and realize unmanned and efficient pretreatment, the base fully upgraded its production line with the TL-PS1400 Large Plastic Crusher.

Before the transformation, the customer’s original equipment had prominent shortcomings: the 110KW power failed to continuously support large-batch hard material crushing, causing frequent motor stalling and tripping; the small feeding inlet required manual cutting of bulk materials before feeding, leading to cumbersome pretreatment procedures and high labor costs; the thin body without thickened wear-resistant liners suffered severe chamber wear and equipment deformation under long-term hard material impact; the non-adjustable discharging particle size resulted in poor adaptability, with an hourly output of only about 1000kg, far failing to match the capacity of the downstream large-scale granulating line and causing long-term semi-idle production lines.
After upgrading to the TL-PS1400 Large Plastic Crusher, all mass production pain points are completely resolved. Equipped with a 132KW high-power motor, the equipment achieves greatly improved power bearing capacity, operating continuously without jamming or stalling when processing thick-walled hard materials and bulk mixed wastes with stable full-load operation. The 1400mm ultra-wide feeding inlet supports direct feeding of large-volume materials, completely eliminating manual pre-cutting procedures, sharply reducing monthly labor costs and doubling feeding efficiency.
The dual protection structure of 40mm thickened steel plate body + built-in wear-resistant liner completely solves chamber wear and body deformation problems, greatly improving equipment durability. The 250mm thickened 40CR tempered main shaft and dual heavy-duty bearings ensure stable transmission, strong torsion resistance and fatigue resistance, achieving zero failure in 24-hour continuous mass production and greatly reducing equipment failure rates. The scientific blade ratio matched with the 800mm large-diameter rotating chamber ensures thorough and uniform material crushing. The customer customized a dedicated screen mesh according to its granulation process, making the discharging particle size precisely match downstream production standards without secondary re-crushing.
The capacity improvement is particularly remarkable. The equipment stably achieves an ultra-high output of 2000-3500kg/h, with pretreatment speed fully matching the rhythm of the entire downstream large-scale production line, completely breaking capacity bottlenecks and increasing the effective operating rate by more than 40%. The customer’s maintenance staff feedback: After upgrading the TL-PS1400 Large Plastic Crusher, the frequency of vulnerable part replacement and shutdown loss are almost eliminated. The capacity doubles while labor costs are halved, enabling rapid equipment return on investment and leapfrog improvement in overall production benefits.
This practical case fully proves that the TL-PS1400 Large Plastic Crusher is the optimal upgrade model for pretreatment in large-scale industrial plastic recycling bases, relying on its core advantages of ultra-high yield, heavy-duty wear resistance, wide adaptability and convenient maintenance.

Call to Action
Refer to the same large-scale production line upgrade solution, obtain exclusive debugging processes for hard material crushing of TL-PS1400 Large Plastic Crusher, and consult free for equipment quotation and full after-sales support!
WhatsApp/WeChat: +86 15092868822 | Email: [email protected]
Related reading
- Equipment Implementation Verification: Film Squeeze Material Granulation Production Line Helps Recycling Factories Realize Unmanned Mass Production and Double Capacity
- Practical Verification of Advantages: PVC Hard Trim Recycling Machine Helps Plate Factories Realize Zero-loss Automatic Edge Trim Recycling
- Customer Testimonial: TL-series High-efficiency Ventilation & Filter Plastic Granulator Unit Helps Textile & Plastic Factories Improve Soft Material Quality & Increase Profit