In the recycled plastic industry, PE and PP films and woven bags are soft plastic materials with large output and high recycling rate, yet they are the most difficult categories for recycling and purification. Soft materials are lightweight, prone to winding, and adhere to a large amount of sediment and oil stains. Ordinary general plastic recycling equipment is extremely prone to jamming, incomplete cleaning, low production capacity and high loss rates. The TL series customized production line of film and woven bag recycling equipment is specially developed for soft plastic recycling pain points. With exclusive crushing technology, multi-stage cleaning system and flexible configuration solutions, it has become the preferred equipment for small and medium-sized recycling enterprises to improve quality and reduce costs in soft material recycling.

Many practitioners hold a misunderstanding that soft plastic recycling only requires simple crushing and washing. In fact, the core difficulties of soft material recycling lie in anti-blocking impurity removal and thorough decontamination. When traditional shredders process films and woven bags, materials are easy to wind the cutter shaft with uneven crushed particle size. Sediment and impurities wrapped inside large materials cannot be completely cleaned, resulting in insufficient finished product purity and low selling prices. In contrast, the film and woven bag recycling equipment is equipped with a self-developed special film crusher adopting a wet crushing structure specially adapted to the characteristics of soft materials. The crushed materials are fine and uniform, fully unfolding material folds to expose embedded impurities completely, laying a foundation for subsequent deep cleaning and greatly improving finished product quality and market value.
In addition to the core crushing technology, the front-end protection system is the key to stable operation of this series of equipment. Waste film and woven bag raw materials are often mixed with a large number of stones, sediment, iron wires and other impurities, which are easy to wear blades and damage equipment. The optional drum screening system and metal detection equipment provide double-layer protection to remove hard impurities and metal sundries in advance, effectively protecting the core crushing unit, reducing equipment operation and maintenance costs, prolonging equipment service life and ensuring 24-hour stable operation of the production line.
The equipment has strong adaptability to materials with different dirtiness levels, with optional hot washing systems to realize targeted production and avoid budget waste. Clean industrial leftover materials and new defective materials can meet standards through conventional water washing technology; agricultural films and construction waste woven bags with heavy oil stains and severe aging can quickly dissolve stubborn oil stains and completely solve the decontamination pain points of soft materials when matched with a hot washing system. Meanwhile, the production line has a high degree of automation. TL300 and TL500 models only require 1-2 workers on duty, and the TL1000 high-capacity model only needs 2-3 workers for full-line operation, with extremely low labor costs, in line with the current cost reduction and efficiency improvement trend of the recycling industry.
In terms of capacity and energy consumption ratio, the three gradient models cover all scenario needs, adapting from small workshop trial production to medium factory mass production. The water consumption, power and footprint of the equipment are scientifically optimized to avoid energy waste caused by oversized equipment for small workloads. Matching with a water circulation system can further save water resources with outstanding mass production cost performance. The complete production line integrates full processes of conveying, screening, crushing, washing, dewatering, drying and baling with compact process connection and regular footprint, suitable for installation in various small and medium-sized factories for rapid production and profit generation after commissioning.
With increasingly fierce competition in the soft plastic recycling industry, extensive low-end production has no profit margin. Only relying on professional equipment to improve finished product purity and reduce production costs can realize profit upgrading. With the core advantages of exclusive soft material technology, flexible configuration, energy and labor saving and stable operation, the TL series film and woven bag recycling equipment helps recycling enterprises solve soft material recycling pain points and realize standardized and high-quality mass production.
FAQ
Q1: Does the soft plastic recycling production line need to be equipped with a water circulation system?
A: Standard configuration is recommended. The film and woven bag recycling equipment requires continuous water cleaning during production. Matching with a water circulation sedimentation and filtration system can realize wastewater recycling, greatly reduce tap water consumption, and achieve remarkable water-saving and cost-reducing effects in long-term mass production.

Q2: Is the daily operation and maintenance of TL series equipment difficult?
A: The operation and maintenance are simple and convenient. The equipment adopts modular structural design with few vulnerable parts and low failure rate. Daily maintenance only requires regular cleaning of screen meshes, inspection of blade wear and motor maintenance, no professional technicians on duty are needed, suitable for long-term use by small and medium-sized enterprises.
Call to Action
Want to learn soft material recycling quality improvement skills, equipment selection schemes and energy-saving cost reduction methods for film and woven bag recycling equipment, and obtain free industry-exclusive technical consultation?
WhatsApp/WeChat: +86 15092868822 | Email: [email protected]
Related reading
- What Is a Plastic Recycling Machine? A 2026 System Guide
- Film Recycling Process Upgrade: Film Squeeze Material Granulation Production Line Solves Pain Points of High Labor Demand and Low Capacity
- Core Cost Reduction Solution for Sheet Production:PVC Hard Trim Recycling Machine Realizes 100% Edge Trim Circular Utilization